Setting/Check Modes - Epson Mobilink TM-P80II Technical Reference Manual

Setting/Check Modes

As well as print mode, the following modes are also provided for making various printer settings and checking
items.
• Self-test mode
• NV graphics information print mode
• Software settings mode
• Restore default values mode
• Interface setup mode
• Radio field intensity check mode (Wi-Fi model)
• Hexadecimal dumping mode
The self-test mode or hexadecimal dumping mode is selected depending on the operation performed when the
power is turned on.
NV graphic information print mode, Software settings mode, and Restore default settings mode are selected
depending on the Feed button operation performed during a self-test.
Close the roll paper cover, and turn on the printer while pressing the Feed button.
Briefly press the Feed button.
Continuing the self-test
Press the Feed
button once briefly
and then hold it
down.
NV Graphics
Information
Open the roll paper cover, and turn on the printer while pressing the Feed
button, and then close the roll paper cover.
Hexadecimal dumping
Self-test
Hold down the Feed button.
Mode selection guidance
Press the Feed Press the Feed
button three times button four times
briefly and then
briefly and then
hold it down. hold it down.
Restore Default
Software Settings
Press the Feed
button five times
briefly and then
hold it down.
Interface Setup
Values
Chapter 4 Advanced Usage
Press the Feed
button eight times
briefly and then
hold it down.
Radio field intensity
check
69