ABB ACS550-02 User Manual page 44

42
3. Press UP/DOWN to highlight the appropriate parameter
in a group.
NOTE! The current parameter value appears below the
highlighted parameter.
4. Press EDIT.
5. Press UP/DOWN to step to the desired parameter value.
Note! To view the parameter default value: In the set mode, press UP/DOWN
simultaneously.
• Press SAVE to store the modified value or press
CANCEL to leave the set mode. Any modifications
not saved are cancelled.
• Press EXIT to return to the listing of parameter
groups, and again to return to the main menu.
Start-up Assistant Mode
When the drive is first powered up, the Start-up Assistant guides you through the
setup of a few basic parameters. For example, at the first start, the drive
automatically suggests entering the first task, Language Select.
The Start-up Assistant is divided into tasks. You may activate the tasks one after the
other, as the Start-up Assistant suggests, or independently. (You are not required to
use the assistant, you may use instead, the parameter mode to set the drive
parameters.)
The order of the tasks presented by the Start-up Assistant depends on your entries.
The task list in the following table is typical.
Task name
Language Select
Motor Set-up
Application
Option Modules
Speed Control EXT1
Speed Control EXT2
Torque Control
Start-Up
Selects the language used in control panel displays
Enters motor data and motor identification
Selects an application macro
Activates optional modules, if any, mounted on the drive.
• Selects the source for the speed reference
• Sets the reference limits
• Sets the speed (or frequency) limits
• Sets acceleration and deceleration times
• Sets up the brake chopper if activated
• Sets the source for the speed reference
• Sets the reference limits
• Selects the source for the torque reference
• Sets the reference limits
• Sets the torque ramp up and ramp down times
Description