The available settings are as follows.
High Speed Copies
To print multiple copies of your document faster, select High
Speed Copies.
Show Progress Meter
To monitor the progress of your print job, select Show Progress
Meter.
EPSON Printer Port (For Windows 95 and 98 only)
To speed up the data transfer rate to EPSON printers, select
EPSON Printer Port.
If your computer supports ECP mode, enable DMA transfer to
speed up printing.
For more details, see "Using Speed & Progress" on page 2-39.
Note:
You cannot make this setting if your printer is connected via the USB
port.
Always Spool Raw Datatype (For Windows NT only)
Select this check box to have Windows NT-based clients spool
documents using the RAW format instead of the EMF (metafile)
format (Windows NT-based applications use the EMF format by
default).
Try using this option if documents spooled in EMF format do not
print correctly.
Spooling RAW datatype requires less resources than EMF, so
some of problems ("Insufficient Memory/Disk Space to Print",
"Slow print speed", etc.) can be solved by selecting the "Always
spool RAW datatype" check box.
Using the Printer Software for Windows
2-33