Table of Contents
Advertisement
File Page Operations
Click the FILE page selection button to display the file
page of the Web application on the right side of the
screen.
Displaying and Modifying
Attributes of Existing Files
1
Select a file to display from the file list on the
page.
The attributes of the selected file appear in the File
Attribute area on the page.
• File name
• File type (real file or temporary file)
• File access rights
• File owner
2
Modify the required attributes (however, the file
owner can be modified only by a superuser).
3
When finished with your modifications, select
Change Attribute from the Function drop-down list
and click the Execute button.
The file page allows you to modify existing files on e-
VTRs in the network, and to create new files.
Creating Files
1
Using the VTR operation buttons, cue up the
position that you want to make the file top.
2
From the Function drop-down list, select Create
New File and click the Execute button.
A new file is created, containing one frame (the
frame at the position where the tape is currently
stopped). The file appears in the file list under the
name "newfile".
3
In the File Attribute area, change the file name,
other attributes, and the file top and file end.
To change the file top and file end
Using the VTR operation buttons, cue up the
position that you want to make the file top and
click the Entry TOP button. In the same way, cue
up the position that you want to make the file end
and click the Entry END button.
4
From the Function drop-down list. select Change
Attribute and click the Execute button.
23
Advertisement
Table of Contents
