Table of Contents
Advertisement
M4M 30 NETWORK ANALYZER USER MANUAL
7.Configuration
In order to change any configuration of the device, it is mandatory to enter the password. The password
is valid as soon as the user remains in the Configuration section and for max. 10 minutes. After quitting
the Configuration section, it is needed to enter again the password.
If the padlock icon is closed, it is needed to enter the password in order to modify any configuration.
If the padlock icon is open, it is possible to modify any configuration without entering any password.
Press
If the user exits from the Configuration section, the device configuration is protected again and it is needed to
re-enter the password.
7.1.Unit
Menu
Modify Password
Language
Reset
Device info
Date/Time
Brightness
Energy Saving
Logs
→
key in order to return to homepage.
Description
Change the existing password.
Change the language of the display.
Reset options for the meter.
Visualization of info related to the meter.
Change date and time on the device.
Change the brightness of the display.
Set energy saving mode for the display.
Visualization of audit log and system log.
31
Advertisement
Table of Contents
