Table of Contents
Advertisement
7.1.2 Delivery in wood transport box
Overseas transports are performed mainly in closed wood transport boxes in
seaworthy packaging. The gearbox is covered with oiled paper and the bottom of
the transport box is lined with foam packaging or the planetary gearbox is packed
in PE foil.
Procedure
To unpack the planetary gearbox:
1
Place the packing on a flat, stable surface.
2
Only open the packing from the top.
3
Check the scope of supply for transport damage and completeness, see chapter
4 "Scope of supply".
4
Compare material number and designation (type code) with those specified in
the order confirmation.
If the material number of the planetary gearbox does not match the one in the
order confirmation, contact the Rexroth Service for clarification. For the
address, see appendix A "Address directory" of the material number-specific
operating instructions.
5
Lift the planetary gearbox out of the packaging with suitable lifting equipment
and suitable attachment means (see chapter 6.1 "Transporting the MOBILEX
GFT-W").
6
For placing the planetary gearbox, make sure that the surface is stable.
7
Place the planetary gearbox with the cover plate down on two suitable squared
timbers. Secure the planetary gearbox against tipping over.
Dispose of the packaging in accordance with regulations in your local country.
8
7.2 Installation conditions
The installation conditions depend on the crane, winch application, equipment
frame, winch base/cable drum where the planetary gearbox is integrated.
Make sure that the equipment frame or winch frame/cable drum where the
MOBILEX GFT-W planetary gearbox is attached to, is torsion resistant. It must
be able to withstand the weight and torque specified for the design.
During assembly, observe by all means the operating conditions that are
specified in appendix D "Technical data / Drawings" of the material number-
specific operating instructions.
Make sure that the work environment on site is free of dust and foreign
substances. The planetary gearbox must be installed free of contamination.
Contamination of the hydraulic fluid may considerably affect the function and
service life of the axial-piston motor, if supplied.
Use cloths made of lint-free fabric for cleaning.
Use mild detergents for removing lubricants and other heavy contaminations.
No detergents may penetrate into the hydraulic system.
RE 79100-01-B/11.2020, MOBILEX GFT-W general operating instructions series 30, Bosch Rexroth AG
Assembly
29/86
Advertisement
Table of Contents
