Using Your Smart Safe - Motorola Bolt Smart Safe User Manual

ITSmart Security, LLC

Using Your Smart Safe

Power
All Smart Safe models provide power via 4 batteries. The XL Smart Safe features a power cord.
When using batteries as the primary power source, the four batteries are expected to last
approximately four (4) months under normal usage conditions. Normal use is considered
opening and closing the Smart Safe two (2) times per day.
The LED indicator on the Smart Safe front will show green when the batteries are fresh and
yellow and red as they drain. You can also see the battery level percentage (%) on the Motorola
Smart Safe app in your Devices section.
Accounts
The XL Smart Safe provides multi-user access with the first user designated as the Owner of the
safe. You may optionally add additional users by following the instructions in the Quick Start
Guide or Set Up section of this manual. These optional users are designated as Regular users.
Accessing your safe
To access your safe, enter your access code or place your finger on the fingerprint scanner (XL
only). To access your safe remotely, use the Motorola Smart Safe app.
Locking your safe
To ensure your safe security, make sure to close your safe door once finished removing or placing
your items. The safe will automatically lock when the door is closed. All Smart Safe models will
beep if le open for 3 minutes. An alarm will sound if the door is le open for 6 minutes. Close the
safe door to turn off the alarm.
Tamper Detection Mode
All Smart Safe models feature Tamper Detection that reacts to motion, free-fall, shock, vibration,
and three-axis tilting. When activated, an alarm will sound if the safe detects any of those
movements. To turn off the alarm, enter your access code or place your finger on the fingerprint
scanner (XL only).
IMPORTANT: All Smart Safe models arrive with Tamper Detection set to Off. To arm Tamper
Detection: With the main door open, Press the "0" key for 5 seconds until the safe beeps. Tamper
Detection Mode will toggle between "Off" (factory default) and "On" with each use of this
sequence. You may also use the web portal or Motorola Smart Safe app to toggle the Tamper
Detection on/off. Activating Tamper Detection is available to the safe owner (user #1) only. This
mode applies only to the XL Smart Safe.
19