Parameter
Configuring Port Settings
Go to Setup Network Setup Port.
Figure 6-2 Port
Port
Table 6-2 Port Configurations
Parameter
Max
Connection
TCP Port
UDP Port
HTTP Port
RTSP Port
Function
5. Close the command line.
Open your browser, type http://<IP address> in the address
bar, and then press Enter.
Function
Displays the maximum number of network connections for the same
camera. The value ranges from 1 to 20. The maximum number of
connections is 20.
The default setting is 37777. You can modify this setting as necessary.
The default setting is 37778. You can modify this setting as necessary.
The default setting is 80. You can modify this setting as necessary.
The default setting is 554. The RTSP stream query format is:
Main stream:
rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=0
Sub stream:
rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=1
You are required to manually enter the following four items: Username,
Password, IP, and Port.
IP: The camera's IP address.
Port: The default is 554. You can leave this field blank if you are using the
default value.
Follow the standard RTSP protocols. When the encode mode is MJPEG, the
maximum supported resolution is 2040×2040.
Configuring Network Settings
37