Installing The Drive - Pioneer BDR-2213 Owner's Manual

Installing the Drive

1 Turn off the power to the computer, and remove the power cable from the AC
socket.
2 Remove the blank panel on the front of the 5-1/4 inch slot.
3 Insert the drive into the slot.
4 Fix the product in accordance with the computer's user manual.
• Use screws no more than 6 mm (15/64 in.) in length. Use of long screws may cause
damage to the drive.
• If the screws are not tightened fully, a rattling sound may be caused by vibration
from the rotation of the disc. Therefore, ensure that the drive is installed securely.
• Make sure the drive is firmly secured within the PC before use.
• Connect cables to the device only after checking that the cables have not
deteriorated and are not damaged.
BDR-2213 (BDR-213ULBK)
13
En