General; Location Of Controls (Cdx-H910Ui) - Sony CDX-H910UI Service Manual

• LOCATION OF CONTROLS (CDX-H910UI)

Location of controls and basic operations
Main unit
OFF
CAT
BTM
T
MODE
Front panel opened
RESET
8
Card remote commander
RM-X151
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 7).
( )/ ( ) buttons
To control radio/CD/USB, the same as
–/+ on the unit.
Setup, sound setting, etc., can be operated by
.
DSPL (display) button page 13, 14, 16
To change display items.
VOL (volume) +/– button
To adjust volume.
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
SEL (select) button
The same as the SELECT/ENTER button on
the unit.
MODE button page 12, 16
Press to: Select the radio band (FM/AM)*
select the play mode of iPod.
Press and hold to: Enter/cancel the passenger
control.
10
SECTION 2
SCRL
DSPL
ALBUM
REP SHUF
EQ3
DM PAUSE
SOURCE
ZAP
(+)/ (–) buttons
To control CD/USB, the same as /
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
.
SCRL (scroll) button
To scroll the display item.
Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When the SAT tuner is connected.
*2 In the case of a CD changer, HD Radio tuner or
SAT tuner being connected; when is
pressed, the connected device ("HD," "XM" or "SR")
will appear in the display, depending on which
device is connected. Furthermore, if is
pressed, you can switch the changer, HD Radio
tuner band or SAT tuner band.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless on the unit is pressed, or a disc is
inserted to activate the unit first.
2 /

GENERAL

This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
BTM/CAT* button page 12
1
To start the BTM function (press and hold).
OFF button
To power off; stop the source.
(BROWSE) button page 11
To enter the Quick-BrowZer mode.
Control dial
To adjust volume; select setup items.
Number buttons
CD/USB:
/ : ALBUM –/+ (during MP3/WMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
: REP page 13, 14, 16
: SHUF page 13, 14, 16
: DM+
Improves digitally compressed sound,
such as MP3.
To activate the DM+ function, set
"ON." To cancel, set "OFF."
: PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
OPEN switch page 12
Display window
DSPL (display)/SCRL (scroll) button
page 13, 14, 16
To change display items (press); scroll the
display item (press and hold).
EQ3 (equalizer) button page 17
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
Receptor for the card remote
commander
CDX-H910UI/HR910UI
This section is extracted
from instruction manual.
(BACK)/MODE button page 11, 12,
16
Press to: Return to the previous display/
select the radio band (FM/AM)* /select the
2
play mode of iPod.
Press and hold to: Enter/cancel the passenger
control.
SEEK –/+ buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
SELECT/ENTER button
Press to: Enter sound setting/apply a setting.
Press and hold to: Enter menu.
SOURCE button
To power on; change the source (Radio/CD/
USB/AUX)* .
2
Frequency select switch (located on the
bottom of the unit)
See "Frequency select switch" in the
supplied installation/connections manual.
ZAP button page 11
To enter ZAPPIN™ mode.
RESET button page 6
Disc slot page 12
To insert the disc.
(eject) button page 12
To eject the disc.
continue to next page
9
5