Table of Contents
Advertisement
System Status LED
Table 1: System Status LED
Color/State
Off
1
Green- solid
Green- blinking
Green- flashing off
Green- flashing on
Amber- solid
Amber- flashing off
Red
1. Blinking: one second on, one second off, 2 seconds cycle.
2. Flashing off: mostly on, fraction of a second off, 2 seconds cycle.
3. Flashing on: mostly off, fraction of a second on, 2 seconds cycle.
Radio Status LED
The Radio Status LED table below is applicable to 2G, 5G, and 6G labels.
Table 2: Radio Status LED
Color/State
Off
Green- solid
Green- flashing off
Amber- solid
LED Display Settings
The LEDs have three operating modes that can be selected in the system management software:
Default mode: refer to
n
Off mode: all LEDs are off
n
Blink mode: all LEDs blink green (synchronized)
n
Rev 01 | March 2022
Meaning
Device Powered off
Device ready, fully functional, no network restrictions
2
Device booting, not ready
3
Device ready, fully functional, either uplink negotiated in sub-optimal
speed (<1Gbps)
Device in deep-sleep mode
Device ready, restricted power mode (limited PoE power available, or
IPM restrictions applied), no network restrictions
Device ready, restricted power mode (limited PoE power available, or
IPM restrictions applied), uplink negotiated in sub-optimal speed
(<1Gbps)
System error condition - Immediate attention required
Table 1
and
Table
Meaning
Device powered off, or radio disabled
Radio enabled in access (AP) mode
Radio enabled in uplink or mesh mode
Radio enabled in monitor or spectrum analysis mode
2.
|
3
Advertisement
Table of Contents
