Bosch SHX78B75UC Use And Care Manual page 46

en-us Troubleshooting
Issue
Dishware is not dry. Dishware removed too early or drying process not
Silverware is not
dry.
Appliance interior
still wet after wash
cycle.
Food remnants on
dishware.
46
Cause and troubleshooting
yet ended.
Wait until the program ends.
1.
Only remove dishware 30 minutes after the
2.
program has ended.
Rinse aid used has a limited drying performance.
Use a name-brand rinse aid.
▶
Eco products may have limited effectiveness.
Silverware not arranged properly in the silverware
basket or silverware drawer.
Droplets can form on the contact points of silver-
ware.
Arrange silverware individually where possible.
1.
→ Page 30
Avoid points of contact.
2.
Not an error. Condensation drying creates water
droplets in the tub. This is normal. Moisture in the
air condenses on the inside walls of the appli-
ance, runs off, and is pumped out.
No action required.
Dishware was placed too close together or rack is
overfilled.
Arrange dishware with sufficient space in be-
1.
tween.
The spray jets must reach the surfaces of the
dishware.
Avoid points of contact.
2.
Spray arm rotation is blocked.
Arrange dishware so it does not obstruct spray
▶
arm rotation.
Spray arm nozzles are blocked.
Clean the Spray arms → Page 42 .
▶
Filters are dirty.
Clean the filters.
▶
→ "Cleaning filters", Page 41
Filters are inserted incorrectly and/or not en-
gaged.
Insert the filters properly.
1.
→ "Filter system", Page 41
Twist filters into place.
2.
Selected wash cycle is too light.
Select a more intensive cycle.
▶