Table of Contents
Advertisement
4 Connect your
conference
speaker
Connect via USB-C dongle
•
Press and hold
turn on the speaker. Plug the USB-C
dongle into the USB port of your PC.
•
After the driver is installed on your
PC, the PC will automatically be
connected to the Philips AECS8100
speaker via the USB-C dongle.
•
On your computer, select
"Philips AECS8100" from the
speaker list, the music will be played
through this speaker.
10 EN
for 3 seconds to
Connect the speaker to
your Bluetooth device
•
Press and hold
turn on the speaker, the speaker
automatically enters Bluetooth
mode, and the backlight of the
Bluetooth key blinks white.
On the Bluetooth device, turn on
Bluetooth, search for and select
"Philips AECS8100" to connect
(enter password "0000" if prompted).
Once the Bluetooth connection is
successful, the backlight of the
Bluetooth key turns solid white and
a prompt tone is heard. Play audio
on your Bluetooth device to start
music streaming.
•
To disconnect the Bluetooth
connection, press and hold the
Bluetooth key for 3 seconds until
the backlight of the
blinks white and a prompt tone is
heard.
•
When the speaker is restarted, it will
automatically be reconnected to the
last connected Bluetooth device.
Note
•
The maximum operational range between the
speaker and a Bluetooth device is approximately
20 meters.
•
In Bluetooth mode, the
+/- and
Answer/Reject keys are effective.
for 3 seconds to
Bluetooth key
Play/Pause, Volume
Advertisement
Table of Contents
