HP 11793A Operating And Service Manual page 19

Microwave Converter Model 11793A
14. Operating Environment
The operating environment should be within the following limitations:
Temperature
..........................
0°C to +55"C
Humidity
..............................
~ 9 5 % relative a t 40°C
Altitude
...............................
44570 meters (1 5 000 feet)
15. Bench Operation
The instrument cabinet has plastic feet which are shaped to insure self-alignment when stacked in a
system configuration.
16. Rack Mounting
Rack mounting information is provided with the rack mounting kits. If the kits were not ordered with the
instrument as options, they may be ordered through the nearest Hewlett-Packard office. Refer to
Paragraph 6, under "Mechanical Options" for kit information. See Figure 2, Rack Mounting Options.
17. Storage and Shipment
The instrument should be stored in a clean, dry environment. The following environmental limitations
apply to both storage and shipment.
Temperature (Standard)
.......................
-
5
5°C
to +7 S"C
Temperature (Options 001, 01 1, and 021)
....
-25°C to +7S"C
Humidity
......................................
4 9
5%
relative
Altitude
.......................................
15 300 meters
( S O
000 feet)
18. Packaging
Original Packaging. Containers and materials identical to those used in factory packaging are available
through Hewlett -Packard offices. If the instrument is being returned to Hewlett -Packard for servicing;
attach a tag indicating the type of service required, return address, model number, and full serial number.
Also, mark the container FRAGILE to ensure careful handling. In any correspondence refer to the
instrument by model number and full serial number.
Other Packaging. The following general instructions should be used for repackaging the instrument with
commercially available materials.
a. Wrap the instrument in heavy paper or plastic. (If shipping to a Hewlett-Packard office or
service center, attach a tag indicating the type of service required, return address, model number,
and full serial number.)
b. Use a strong shipping container. A double-wall carton made of 2.4 MPa (350 psi) test material is
adequate.
8