Table of Contents
Advertisement
Operation
EMU42560
Checking power trim and tilt system
EWM01930
WARNING
Never get under the lower unit while it is
G
tilted, even when the tilt support lever is
locked. Severe injury could occur if the
outboard motor accidentally falls.
Body parts can be crushed between the
G
motor and the clamp bracket when the
motor is trimmed or tilted.
Be sure no one is near the outboard mo-
G
tor before performing this check.
1.
Check the power trim and tilt unit for any
sign of oil leaks.
2.
Operate each of the power trim and tilt
switches on the remote control and en-
gine bottom cowling to check that all
switches work.
3.
Tilt the outboard motor up and check that
the tilt rod and trim rods are extended
completely.
F200C, FL200C, F225B, FL225B, F250A,
FL250A
1. Tilt rod
2. Trim rods
45
F225C
2
1. Tilt rod
2. Trim rods
4.
Use the tilt support lever to lock the motor
in the up position. Operate the tilt down
switch briefly so the motor is supported
by the tilt support lever.
F200C, FL200C, F225B, FL225B, F250A,
FL250A
1. Tilt support lever
F225C
1. Tilt support lever
1
ZMU06016
1
ZMU06017
Advertisement
Table of Contents
