Kenwood KMM-BT732HD Quick Start Manual page 9

Part list (supplied)
(A) Faceplate (×1)
(B) Trim plate (×1)
(C) Mounting sleeve (×1)
(D) Wiring harness (×1)
(E) Extraction key (×2)
Installing the unit (without mounting sleeve)
1 Remove the mounting sleeve and trim plate from the unit.
2
Align the holes in the unit (on both sides) with the vehicle
mounting bracket and secure the unit with supplied screws.
Use only the specified screws. Using wrong screws might damage
the unit.
Removing the unit
(F) Screws
M5 × 7 mm (×4)
M5 × 6 mm (×4)
M4 × 8 mm (×1)
Wiring connection
Fuse (10 A)
Car fuse box
a Brown: Connect to the device
equipped with muting feature
to mute this unit
b Blue/white: To the power
control terminal when using
the optional power amplifier
or to the antenna control
terminal in the vehicle
c Light blue/yellow: To the
steering wheel remote control
adapter
d Red: Ignition 12 V
e Yellow: Battery 12 V
f Black: Ground
Antenna terminal
If no connections are made, do not
let the wire come out from the tab.
Ignition switch
Car fuse box
Battery
g White ª, White/black ·:
Front speaker (left)
h Gray ª, Gray/black ·:
Front speaker (right)
i Green ª, Green/black ·:
Rear speaker (left)
j Purple ª, Purple/black ·:
Rear speaker (right)
3