Power Tilt Models - Yamaha F15C Owner's Manual

Operation
control lever / gear shift lever in neutral.
5. Place the tilt lock lever in the lock/down
position, then slightly tilt the outboard
motor up until the tilt support bar auto-
matically returns to the free position.
6. Slowly lower the outboard motor to the
normal position.
EMU32861

Power tilt models

The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM00260
NOTICE
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU32942
Procedure for power tilt models
1. Place the remote control lever / gear
shift lever in neutral.
60
ZMU05541
2. Slightly tilt the outboard motor up to the
desired position using the power tilt
switch. WARNING! Using the power
tilt switch on the bottom cowling
while the boat is moving or engine is
on could increase the risk of falling
overboard and could distract the op-
erator, increasing the risk of collision
with another boat or an obstacle.
[EWM01960]
N
UP
UP
DN
ZMU05533
ZMU01935