Parts List
b.
c.
d.
Figure 6-10
Left Table segment
The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top.
Note
Attach the left center Table leg.
Step 11
Cisco TelePresence System 3200
6-12
While a draw bolt is being tightened, hold the table edges together to avoid damage to the draw bolt
or the table segment.
Tighten the draw bolts so the two table segments are connected snugly.
While one person is tightening the draw bolts from below, it is important for the support person to
maintain the alignment of the table segment edges.
7
12
10
Chapter 6
6
Building the First Row Table Assembly
OL-14521-01