Parts And Their Functions; Exterior View - Canon Perfect Binder-F1 User Manual

Parts and Their Functions

This section explains the names and functions of interior and exterior parts, and
1
operation buttons.

Exterior View

[1] Top cover
Open this cover when clearing a paper jam from
the gathering tray. ( P. 3-2)
[2] Energy saver/LED
Enters and exits the energy save mode. Also, it
lights green in energy save mode and flashes
when adjustment of the glue temperature starts.
( P. 1-6)
[3] Glue unit
Open when replenishing glue. ( P. 2-17)
[4] Front cover (left/right)
Open these covers when clearing a paper jam.
( P. 3-6)
[5] Front cover LED
Lights orange during a binding operation to
indicate that the front cover is locked. Goes out
to indicate that the cover is unlocked when
clearing a paper jam is required or the binder is
not doing a binding operation. ( P. 3-6)
1-2

Parts and Their Functions

[1]
[11]
[10]
[3]
[4]
[5]
[9] [8]
[6] Breaker
Use to do tests of the breaker. This breaker is to
completely prevent short circuits. ( P. xi)
[7] Test button
Press when performing testing breaker
inspection. ( P. xi)
[8] Trimmer waste unit
Open to discard cuttings. ( P. 2-14)
[9] Stacker
Holds completed booklets. ( P. 2-11)
[10]Stacker open button/LED
Press when removing booklets from the finished
booklet receptacle. Also, it lights green when the
stacker is open or the stacker is full, and it
flashes while preparing to open/close.
( P. 2-11)
[11]Stack LED
Lights green when the finished booklet is
stacked in the stacker and flashes while a
binding operation is in progress. ( P. 2-11)
[2]
[6]
[7]