Toshiba TWD-BJ120M4M Owner's Manual page 21

OPERATIONS
DELAY END
Set the Delay function:
1. Select a programme
2.Press the DELAY END button to choose the time(the delaying end time is 1-24 H.)
3.Press [START/PAUSE]
to commence the delay operation
ON/OFF
Cancel the Delay function:
Press the [DELAY END]button until the display be 0H.It should be pressed
before starting the programme. If the programme already started, should press the
[ON/OFF]
button to reset the programme.
Caution!
• If there is any break in the power supply while the machine is operating,
a special memory stores the selected programme and when the power is
restarted, the machine will run the previous program automatically.
• While the machine is delaying, If there is any break in the power supply ,the
machine can't start up operation automatically. You should set it again.
RELOAD
This operation can be executed during the washing process. When the drum is
still rolling and there is large amount of water with high temperature in the drum.
The state is unsafe and the door cannot be opened forcefully. To press
[START/PAUSE] for 3 sec. to reload, and small amount of clothes can be added
during washing process. Please follow the steps as bellow:
1.Wait until the drum stops rotation.
2.The door lock is unlocked.
3.Open the door , add clothes to the drum, and close the door. Then press the
[START/PAUSE] button.
Press[START/PAUSE]
3sec.
Caution!
• Don't use the Reload function when the water level over the edge of the
inner tub or the temperature is higher.
Choose the Programme
DELAY
END
Setting time
Add Clothes
20
Start
START/PAUSE