Advertisement
USE OF YOUR PRODUCT
Use of gas burners
Ignition of the burners
To determine which knob controls which burner, check the position symbol above the knob.
•
Manual Ignition of the Gas Burners
If your appliance is not equipped with any ignition aid or in case there is a failure in the electric
network, follow the procedures listed below:
For Hob Burners: To ignite one of the burners, press and turn its knob counter-clockwise so that the
knob is in maximum position, approach a match, taper or another manual aid to its upper
circumference. Move the ignition source away as soon as you see a stable flame.
For Oven Burner: To ignite the oven burner, press and turn the oven control knob counter-clockwise so
that the knob is in maximum position, approach a match, taper or another manual aid to the ignition
hole that is located on the front left corner of the burner. Move the ignition source away as soon as you
see a stable flame.
For Grill Burner(If available): To ignite the grill burner, turn the grill valve in the clockwise position until
the marker on the knob points at the grill sign. Then, keep the knob pressed and approach a match,
taper or another manual aid to the holes that are situated on the burner. Move the ignition source
away as soon as you see a stable flame.
•
Electrical Ignition(If available)
Electrical Ignition by Spark Button
Figure 1
Electrical Ignition by Hob Control Knob
Press the valve of the burner you want to operate and turn the valve in the counterclockwise
direction (clockwise for the grill burner) so that the knob is in maximum position while keeping the
knob pressed. The spark plugs will generate sparks as long as you keep the control knob pressed.
The micro switch placed under the knob will automatically create sparks through the spark plug of
the burner. Continue pressing the knob until you see a stable flame on the burner.
Press the valve of the burner you want to operate and turn the valve in
the counter-clockwise direction so that the knob is in maximum
position and with your other hand, press the ignition button (Figure 1)
at the same time. Press the ignition button immediately, because if you
wait, a build up of gas may cause the flame to spread. Continue
pressing the ignition button until you see a stable flame on the burner.
3
Advertisement
