Place the Active XPA over the transparency. Align it to fit in the corner cutouts
3.
on the large template.
Step 3: Aligning the Active XPA
Check the Use Transparency Adapter option in the HP scanning software.
4.
NOTE: The Use Transparency Adapter option is under the Tools menu in HP Precisionscan Pro.
Scan as you normally would.
5.
Scanning 35-mm slides
Install the Active XPA:
Place the small template in the cutout area of the large template.
1.
Step 1: Placing the small template in cutout area
All manuals and user guides at all-guides.com