Haier HDE5000AW User Manual And Installation Instructions page 30

English
Custom Program: (11)
•
This allows you to save a favorite cycle,set the desired settings and touch press
"custom program"button for 3 seconds. A beep will sound to indicate the
cycle has been saved.
To recall your custom cycle ,press the "custom program"button before drying
a load.
To change the saved cycle,set the desired settings and "custom program"button
for 3 seconds.
You can also program Anti-Bacterial, Wrinkle Saver and Damp Dry Signal.
Press custom program and press start/pause button to activate.
Digital Display
• Indicates the remaining time (min) during cycle operation.
Note: If the dryer has any problems, it will display an error message.
Status Indicator: (13)
- Child Lock: You can lock the controls to prevent any selections from being
- Check Filter:
- Dry:
- Cool Down:
29
(12)
made.Or you can lock the controls after you have started a cycle.
Children cannot accidentally start the dryer by touching pads
with this option selected.
To lock the dryer,press and hold "Damp Dry Signal"for 3 seconds.
Asingle beep tone is heard and Child Lock is glow.To unlock the
dryer,press and hold the "Damp Dry Signal"for 3 seconds.
After the power button is pressed,the check filter indicator could
flashes until Start/Pause is selected.
This is a reminder to clean the lint filter before the dry
program starts.
When lit this indicates the process the cycle is currently in.
When lit this indicates the process the cycle is currently in.