Table of Contents
Advertisement
MAINTENANCE
Cleaning and maintenance
Cleaning the exterior of the air purifier
f Dip a towel in warm water and wring it
f
out before using it to clean the product.
f Use a cotton swab or exclusive cleaning
f
(superfine fiber) cloth to clean the groove.
f If it's too hard to clean the dust on the
f
front cover, remove the cover and wash
it with water.
CAUTION
• Do not clean the air purifier with an alkali
detergent.
• Do not clean the surface of the air purifier
with sulfuric acid, hydrochloric acid or
organic solvent (thinner, kerosene, acetone,
etc.), or attach a sticker to the unit. This
may damage the surface of the air purifier.
Cleaning the sensors
f If there's dust or foreign substances
f
on the sensor, use a vacuum cleaner to
clean the sensor and its surrounding.
f If there's any foreign substances on the
f
sensor, it may not perform properly.
CAUTION
• Do not put any dust in the sensor parts.
ACR Alps_IB(2015)_EN_DB68-05435A-02.indd 19
Cleaning and replacing the filter
Removing the filter
1 Open the front cover
f Press the top part of the product with
f
your thumb and pull the front cover
with other fingers.
2 Remove the Pre filter
3 Remove the Integrated filter
19
ENGLISH
2015-09-14 오후 1:50:22
Advertisement
Table of Contents
