Recording TV programmes
You can record Digital TV programmes, store it on the internal HDD, external HDD or USB device.
Preparations:
Select the recording location using [REC Device]
l
option on the SETUP menu. (page 24)
Connect a USB device, if [REC Device] option is
l
set to [USB].
You need minimum of 20MB free space on the
l
storage for recording.
Normal Recording
1
Use PR (U/u) or v/V to select a programme you want
to record.
Press REC to start recording.
Press PAUSE to pause recording, press PAUSE
l
again to resume recording.
You can watch another programme while recording.
l
Press STOP to stop recording.
To stop recording, you must move to the programme
l
being recorded before pressing STOP.
TV recordings will be stored in the [REC] folder of the
l
storage you've set in the [REC Device].
Only HDD type USB storages are Available for USB
l
recording. Flash type USB storages are not available for
recording.
Dual Programme Recording
You can record two Digital TV programme at the same
time.
1
Use PR (U/u) or v/V to select a programme you want
to record.
Press REC to start recording.
Use PR (U/u) or v/V to select another programme
you want to record.
4
Press REC to start recording.
While recording two programmes simultaneously,
l
you can only watch the programmes being recorded.
5
Press STOP to stop recording.
To stop recording, you must move to the programme
l
being recorded before pressing STOP.
Timer Recording (Manual)
You can set the timer for a total of 32 programmes, up to
30 days in advance.
1
While watching TV, press TIMER REC.
Use v/V to select [NEW], and press OK.
Select an item using b/B and adjust it using v/V.
The adjustable items are listed below.
PR
Sets the programme position.
Date
Sets the date.
Start
Sets the start time.
End
Sets the end time.
Repeat
Choose a desired repeat mode. (Once,
Everyday, Mon-Fri, Mon-Sat or Weekly)
Media
Sets the device to be recorded.
HDD: internal HDD
HDD+: external HDD
The timer recording can be set from 3 minutes after
l
the current time.
Timer recording is not available on a USB device.
l
4
Press OK and confirm message appears.
5
Select [OK] then press OK.
If you input the wrong information, an error message
l
will be appear and the timer recording cannot be
made.
Select [Cancel] and press OK to cancel.
l
8