Changing Input Sources - HP xp8010 series Reference

RS-232 keyword listing
Keyword Parameters
STAT ?
ALERT Not a request —
see note

Changing input sources

When the input source is changed back to a source used previously, the video settings
usually return to their previous values for that source. However, if too many different
types of sources have been selected since this source was last used, default values will
be used instead. The projector stores values for the last 14 sources used.
✎
A different source is defined as any input that has different signal characteristics from
another input, even if connected to the same port on the projector.
If analog and digital sources are simultaneously wired to the M1 port, the projector
treats them as separate inputs. However, if the M1 source is selected, the analog M1
input is activated. Use the NXT keyword to activate the digital M1 input.
16
(continued)
Description
Queries the projector's current state:
• 0 = standby state
• 1 = on
Note: STAT can be used anytime, regardless of the
projector's state.
Notifies when a system alert condition occurs:
• 0 = lamp life warning
• 1 = lamp life reached
• 2 = lamp faulty
• 3 = lamp problem
Note: ALERT is sent only by the projector, and cannot be
used in requests.
• 2 = warm-up state
• 3 = cool-down state
• 4 = internal temperature
too high
• 5 = fan problem
• 6 = ambient temperature
too high
RS-232 protocol reference