Table of Contents
Advertisement
•
Rotate it to the O
N
engine.
•
Rotate it to the O
FF
1. Off position
Recoil-Start Handle
To start the engine, pull the recoil-start handle
4) quickly to turn the engine over. The engine controls
described above must all be set correctly for the
engine to start.
position to start and run the
position to shut off the engine.
Figure 5
2. On position
Wedge Control Lever
The wedge control lever actuates the hydraulic valve
that moves the splitting wedge forward and reverse
during the log splitting process.
•
Hold the control lever toward the end plate to
move the splitting wedge forward.
•
Release the control lever to stop the splitting
wedge movement.
•
Move the control lever to the reverse position to
retract the splitting wedge. Moving the lever to
the full reverse position automatically retracts the
splitting wedge all the way.
g021103
(Figure
1. Move the wedge forward.
2. Control lever (neutral
position)
Specifications
Length
Width
Height
Weight
Maximum log opening
Hitch receiver
8
Figure 6
3. Move the wedge rearward.
246 cm (97 inches)
130 cm (51 inches)
115 cm (46 inches)
412 kg (909 lb)
63 cm (25 inches)
5 cm (2 inches)
g206049
Advertisement
Table of Contents
