Entering Text Using Block Recognizer; Entering Text Using The On-Screen Keyboard - HP iPAQ rw6800 User Manual

Text Input Method
Keyboard
Letter Recognizer
Transcriber
HINT Change the text input method from within any program by tapping
the Input Selector arrow and tapping an input method.

Entering Text using Block Recognizer

1. From any program, tap the Input Selector arrow, and then
Block Recognizer.
2. Write characters, numbers, and symbols in the designated writing
area.
• Enter letters by writing in the abc (left) area of the box.
• Enter numbers by writing in the 123 (right) area of the box.
• Enter symbols and punctuation by tapping in either area of the
NOTE Block Recognizer is available when text entry is possible.
HINT For help with writing characters with Block Recognizer, tap the
question mark near the writing area.

Entering Text Using the On-screen Keyboard

1. From any program, tap the Input Selector arrow, and
then Keyboard.
2. Tap on the appropriate characters, numbers, and symbols on the on-
screen keyboard.
You can increase the size of the on-screen keyboard keys to make them
easier to tap.
1. Tap Start > Settings > Personal tab > Input.
2. On the Input Method tab, select Keyboard as the input method,
and tap Large Keys.
3. Tap OK.
NOTE You can enlarge the keys even more by selecting the Use
gestures for the following keys check box. Fewer keys appear on
the keyboard, but you can do gestures for Space, Backspace, Enter, and
Shift+key.
Definition
Tap keys on the on-screen keyboard displayed on the screen
to enter text.
Write individual letters, numbers, and punctuation that are
converted into typed text.
Write in cursive, print, or mixed handwriting (consisting of
both cursive and print) and convert your writing into
typed text.
box and then writing the desired character.
–22