Advertisement
OPERATION
DESCRIPTION
ADD USER
Delete All
Press S switch, enter master PIN code when
Fingerprint
prompted by the voice guide, and press #
followed by 3, 5. Press #. Successfully deleted.
Master fingerprint cannot be deleted before the
default setting is restored.
ADD
Activate
Press S switch, enter master PIN code when
Network
prompted by the voice guide, and press #
*(optional
followed by 4, 1
function)
Network
requires the support of network
components. Refer to network components user
guide for details.
Deactivate
Press S switch, enter master PIN code when
Network
prompted by the voice guide, and press #
*(optional
followed by 4, 2
function)
Successfully deactivated.
SYSTEM SETTINGS
Unlock Mode
Press S switch, enter master PIN code when
prompted by the voice guide, and press #.
Activate safe mode: Enter 5, 1, 1
Deactivate safe mode: Enter 5, 1, 2.
Change
Press S switch, enter master PIN code when
Language
prompted by the voice guide, and press #
Chinese: Enter 5, 2, 1
English: Enter 5, 1, 2
INSTANT FUNCTION SETTINGS
Activate One
Press 2, 2, #
Touch Security
Deactivate One
Press 4, 4, # followed by master PIN code and
Touch Security
press #
Long Distance
Press 6, 6, #
Call *(optional
function)
Activate Force
Short press "I" key
Lock
Deactivate
Enter master information. Open the door for once.
Force Lock
Active Child's
Press
for 3-5 seconds to active the child's lock
Lock
1. Deactive by presssing the unlock buttom from inside
Deactivated
2. Press
for 3-5 seconds again to deactive the
Child's Lock
child's lock.
* (optional function) Network version requires the purchase of
network components separately.
OPENING THE DOOR
OPEN WITH PIN CODE
Touch the number pad >>> Enter your registered PIN code
>>> Press # to open door
OPEN WITH FINGERPRINT
Enter the registered
FINGERPRINT
fingerprint (Inside)
NETWORK
OPEN WITH CARD KEY
OPEN WITH MECHANICAL KEY
OPEN WITH EMERGENCY POWER SUPPLY
Touch the number pad >>> Enter your registered PIN code
and press # OR enter registered card OR
TO REPLACE BATTERY
This product uses four 1.5V alkaline AA batteries. It is sustainable for 1
year if used 10 times a day. (Users are advised to use genuine alkaline
batteries.)
1.5V alkaline AA battery
Make sure to replace all 4 batteries in the following manner:
* Upon hearing the low battery reminder;
* Using or replacing wrong type of batteries, which may cause
an explosion;
* Dispose of old batteries responsibly;
ALARM AND USUAL FUNCTION
BREAK IN / DAMAGED ALARM
• Board anti-pry alarm: Alarm will go off when the front board is being
pried.
• Handle anti-pry alarm: System will lock down when the handle is
being pried.
• One touch security alarm: In single mode, alarm will go off when
someone is breaking the lock. In network mode, alarm will go off
when someone is breaking the lock and will be reported to the
terminal (network version requires the purchase of network
components separately).
• Key open sensor alarm: Alarm will go off when the mechanical key is
being used.
• Main bolt alarm: Alarm will go off when the main bolt is not locked.
• SOS alarm (only for network version): Both single mode and network
mode alarm will not go off, but will be reported to the terminal (network
version requires the purchase of network components separately).
3-MINUTE SYSTEM LOCK
• System will lock down for 3 minutes after 3 failed attempts. The
number pad will indicate the countdown time.
Tap registered card key
Key Hole
Use your mechanical key
when unable to use the door
lock. E.g. forgot PIN code /
electrical failure.
Connect with power bank
during emergency
scan your registered fingerprint
FORCE LOCK
• Short press I key and the voice guide will say "Force lock activated".
Then you can use your master PIN code or master fingerprint or
mechanical key to unlock the door to which you will hear "Force lock
deactivated".
IC CARD FEATURE REMINDER
• Other IC cards using the NFC feature may not function on other devices
once it is registered on Bosch Smart Lock.
SERVICE AND WARRANTY
• 24 hours hotline
• Genuine parts
• Lifetime service
• Extended warranty plan
PRODUCT STANDARD
This smart lock series is certified with the following national standards:
GA701-2007
General specifications for burglary-resistant fingerprint locks
GB21556-2008
General safety-technique requirements of locks
For more services and details, kindly call: +6014 3554 319
WARRANTY AND SERVICES
FRIENDLY REMINDER
In the event that your smart lock has malfunctioned, kindly contact your
reseller or customer service and provide the following information:
Address and contact number. Description of malfunction, purchase
date and received date, product model and product code. The
information above will help us serve you better and save you
unnecessary costs.
TERMS OF WARRANTY
The warranty service applies to manufacturing defects and regular-use
coverage only. It does not cover the following:
• Any damage caused by the user(s);
• Incorrect installation, testing and/or use other than instructed
by user manual;
• Unauthorized repair and/or modification to the product;
• Any accidental, misuse and/or intentional damages that
causes malfunction;
• Damage caused by acts of nature;
• Any loss and/or damage caused by the product's environment
such as electricity, temperature, moisture, magnetic field
and/or any other unavoidable reasons.
• Any other reason except for product quality.
PRODUCT WARRANTY CARD
This product is under 3 (three) years warranty from the date of purchase
(as stated on the original receipt). The company provides free warranty
service for successful register user under the following terms:
Make sure to send your original purchase receipt or serial number
together with your product for our distributor. You are not entitled
to the warranty service should you fail to present the items
mentioned above.
You are not entitled to the warranty service should the purchase
receipt and/or serial number have been tampered with or altered
in any fashion.
STEP 1
SCAN the QR Code
Register via
WhatsApp
(+6 014 355 4319)
STEP 2
SEND the following details:
Full Name (as per NRIC)
Email Address
Smart Lock Serial No. #
STEP 3
Please allow up to
3 working days for processing
and confirmation.
ATD LIFETECH CORPORATE SDN. BHD.
42A-1, Jalan OP 1/3, Pusat Perdagangan One Puchong,
Off Jalan Puchong 47160, Selangor
Contact:
+60 14 3694 914 (Sales)
+60 14 3554 319 (Helpline)
Advertisement
