Unsupported Usb Flash Media Device - HP Rp5000 - Point of Sale System Management Manual

Desktop Management Guide
Ä
Ä
Ä
✎
20

Unsupported USB Flash Media Device

CAUTION: Not all computers can be booted from a USB flash media
device. If the default boot order in the Computer Setup (F10) Utility lists
the USB device before the hard drive, the computer can be booted from a
USB flash media device. Otherwise, a bootable diskette must be used.
To create a bootable USB flash media device, you must have:
■
a USB flash media device
■
a bootable DOS diskette with the FDISK and SYS programs (If
SYS is not available, FORMAT may be used, but all existing files
on the USB flash media device will be lost.)
■
a PC that is bootable from a USB flash media device
CAUTION: Some older PCs may not be bootable from a USB flash
media device. If the default boot order in the Computer Setup (F10) Utility
lists the USB device before the hard drive, the computer can be booted
from a USB flash media device. Otherwise, a bootable diskette must be
used.
1. If there are any PCI cards in the system that have SCSI, ATA
RAID or SATA drives attached, turn off the computer and unplug
the power cord.
CAUTION: The power cord MUST be unplugged.
2. Open the computer and remove the PCI cards.
3. Insert the USB flash media device into one of the computer's
USB ports and remove all other USB storage devices except USB
diskette drives. Close the computer cover.
4. Plug in the power cord and turn on the computer.
5. As soon as the computer is turned on, press
monitor light turns green to enter Computer Setup. Press
bypass the title screen, if necessary.
F10
If you do not press
computer and again press
access the utility.
www.hp.com
at the appropriate time, you must restart the
F10
when the monitor light turns green to
Desktop Management Guide
F10
when the
Enter
to