Eject The Stack After The System Is Idle For A Certain Time - Canon VarioPrint 6000 Series Operation Manual

Eject the stack after the system is idle for a certain time

Introduction
To prevent that the operator forgets to pick up finished output, you can set the [Ejection timer of
stack tray]. After the system is idle for the defined timeout, the stacker automatically ejects the
stack.
Procedure
1. Open the Settings Editor and go to: [Preferences]→[Print job defaults]→[Stacker]
2. Check that the setting [Automatic ejection of stack tray] is enabled.
3. Use the [Stack eject after idle time] option to define the [Ejection timer of stack tray].
4. Click [OK].
VarioPrint 6000 line
Eject the stack after the system is idle for a certain time
Chapter 5 - Prepare the print system 73