Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WAW28760SA
Summary of Contents for Bosch WAW28760SA
- Page 1 Washing machine WAW28760SA en Instruction Manual and Installation Instructions...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Removing laundry/switching off the appliance ....42 Appliance settings ..43 Activating the setting mode ..43 Changing the signal volume .
-
Page 5: Intended Use
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions. -
Page 6: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 7: Installation
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate. - Page 8 Safety instructions The mains plug must be Warning ■ freely accessible at all times. Risk of fire/material damage/ If this is not possible, in damage to the appliance! order to comply with the The use of extension cords or relevant safety regulations, a power strips may result in fire switch (all pole due to overheating or short...
- Page 9 Safety instructions If the water hoses are altered Warning ■ or damaged, this may result Risk of injury! in material damage or The appliance is very heavy. ■ damage to the appliance. Lifting it may result in injury. The water hoses must not be Do not lift the appliance on kinked, crushed, altered or your own.
-
Page 10: Operation
Safety instructions If you reach into the drum Operation ■ while it is still rotating, you Warning risk injuring your hands. Risk of explosions/fire! Wait until the drum has Laundry that has been stopped rotating. pretreated with cleaning agents Warning that contain solvents, e.g. -
Page 11: Cleaning/Maintenance
Safety instructions Warning Cleaning/Maintenance Eye/skin irritation! Warning Detergent and care products Risk of death! may spray out if the detergent The appliance is powered by drawer is opened while the electricity. There is a risk of appliance is in operation. electric shock if you come into Rinse eyes/skin thoroughly if contact with live components. - Page 12 Safety instructions Warning Caution! Risk of poisoning! Material damage/damage to the appliance Poisonous fumes may be given off by cleaning agents that Cleaning agents and agents for contain solvents, e.g. cleaning pretreating laundry (e.g. stain solvent. removers, prewash sprays, etc.) Do not use cleaning agents that may cause damage if they contain solvents.
-
Page 13: Environmental Protection
Environmental protection The more indicator lights light up, Environmental the higher the programme's consumption. protection This enables you to compare the consumption levels of the different P ackaging/used appliance programmes when choosing your E n v i r o n m e n t a l p r o t e c t i o n programme settings and decide on Dispose of packaging in an an energy- and water-saving... -
Page 14: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions I ncluded with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 15: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine. -
Page 16: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13). -
Page 17: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose (approx. -
Page 18: Water Inlet
Positioning and connecting Water inlet Optimum water pressure in the supply network Warning At least 100 kPa (1 bar) Danger of death! Maximum 1000 kPa (10 bar) There is a risk of electric shock if you When the tap is open, the water flow touch live components. -
Page 19: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 20: Levelling
Positioning and connecting Levelling Align the appliance using a spirit level. Incorrect alignment may result in loud noises, vibrations and machine "movement". Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction. Check the alignment of the washing machine with a spirit level, and adjust it if necessary. -
Page 21: Electrical Connection
Positioning and connecting Electrical connection The mains plug can be accessed at ■ all times. If this is not possible, in order to comply with the relevant Warning safety regulations, a switch (2-pole Danger of death! switch-off) must be built into the There is a risk of electric shock if you permanent installation in accordance touch live components. -
Page 22: Before Using The Appliance For The First Time
Positioning and connecting Before using the appliance for the first time The washing machine was thoroughly tested before leaving the factory.To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 23: Transportation
Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■... -
Page 24: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button. -
Page 25: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance W ashing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 39 Operating/display panel Door with door handle 9S Open the door... -
Page 26: Control Panel
Getting to know the appliance Control panel Active P Child lock. E 3 sec. ( Main switch to prevent the set functions from for switching the washing machine being changed accidentally: on and off: To do so, press the Ready in ñ + Press the # button. -
Page 27: Display Panel
Getting to know the appliance Display panel Further information Active Oxygen Ø ~ Page 37 Ø Programme progress: Active oxygen phase Ø Prewash Wash Rinse õ Spin - 0 - Programme end Default programme settings: ( Temperature in °C Programme end during Rinse Stop Ž... -
Page 28: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 29 – Light: Do not prewash, select the P repare the laundry SpeedPerfect ( setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 29: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 30: Overview Of Programmes
Overview of programmes Overview of programmes P rogrammes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and the fabrics for which it is Temperature that can be selected suitable. - Page 31 Overview of programmes Programme/type of laundry/information Settings Easy-Care Max. 4 kg Items made of synthetic or blended fabrics Ž ... 60 °C $, 0 - 1200 rpm EcoPerfect F, SpeedPerfect (, Prewash T, Rinse Plus ', Easy Iron p, Active Oxygen Ø **** Max.
- Page 32 Overview of programmes Programme/type of laundry/information Settings Rinse / Spin / Drain Combined extra programme for rinsing and spinning the laundry, and draining the rinsing water $, 0 - 1600** rpm The Rinse Plus ' button is activated at the factory for Note: .
- Page 33 Overview of programmes Programme/type of laundry/information Settings Super Quick 15’ Max. 2 kg Extra-short programme of approx. 15 minutes, suitable for small Ž - 40 °C items of lightly soiled laundry $, 0 - 1200 rpm *** Dark Wash Max. 3.5 kg Dark-coloured cottons and dark-coloured easy-care items;...
- Page 34 Overview of programmes Programme/type of laundry/information Settings *** Night Wash Max. 4 kg Particularly quiet programme for washing overnight; suitable for Ž - 40 °C items made from cotton, linen, synthetic or blended fabrics $, 0 - 1200 rpm Notes EcoPerfect F, SpeedPerfect (, End signal deactivated, ■...
-
Page 35: Odor Removal Ø
Overview of programmes Odor Removal Ø Starching Odor Removal Ø is an innovative Laundry should not be treated Note: programme that is designed to refresh with fabric softener. laundry and remove odours (e.g. the smell of cigarettes and kitchen odours). Liquid starch can be used to stiffen Sweaty fabrics must be washed. -
Page 36: Programme Default Settings
Programme default settings The maximum speed that can be set Programme default depends on the model and programme that has been selected. settings Ready in T he default programme settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after selecting the programme. -
Page 37: Additional Programme
Additional programme settings Easy Iron Additional programme settings Reduces creasing thanks to a special spin sequence followed by fluffing and An overview of all additional settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s which can be selected depending on reduced spin speed. -
Page 38: Operating The Appliance
Operating the appliance The maximum load and the duration ■ Operating the of the programme (alternately) Information on water and energy appliance ■ consumption P reparing the washing In appliances with a drum light: O p e r a t i n g t h e a p p l i a n c e machine The drum is lit after switching on the appliance, after opening and closing the... -
Page 39: Measure And Add Detergent And Care Products
Operating the appliance Measure and add detergent and care products Caution! Damage to the appliance Cleaning agents and agents for pre- treating laundry (e.g. stain removers, prewash sprays, etc.) may cause Measuring aid A For liquid detergent damage if they come into contact with Compartment II Detergent for the main the surfaces of the washing machine. -
Page 40: Change The Programme Default Settings
Operating the appliance Change the programme Note: Foam detection If the Å symbol also lights up in the default settings display panel, the washing machine has detected too much foam during the You can use or change the default wash programme and automatically settings for this washing cycle. -
Page 41: Adding Laundry
Operating the appliance Adding laundry When switching from Note: programmes that use active oxygen to After starting the programme, you can those that do not, the door will remain add or remove laundry if necessary. locked for up to 25 minutes until there is no longer any active oxygen in the Press the A button to do this. -
Page 42: Programme End
Operating the appliance Programme end - 0 - and ÿ appear in the display panel. The A button indicator lamp is off. Removing laundry/switching off the appliance Open the door and remove the laundry. Press the # button. The appliance is switched off. -
Page 43: Appliance Settings
Appliance settings Changing the signal volume Appliance settings Use the Ready in + or - button to Y ou can change the following settings: change the following settings at the A p p l i a n c e s e t t i n g s corresponding programme selector The volume of the buttons and the ■... -
Page 44: Sensors
Sensors Sensors A utomatic load sensing S e n s o r s Depending on the type of fabric and load, the automatic load sensing function optimally adjusts the water consumption and programme duration in each programme. Unbalanced load detection system The automatic unbalanced load detection system detects imbalances... -
Page 45: Cleaning And Maintenance
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■... -
Page 46: Detergent Drawer And Housing
Cleaning and maintenance Detergent drawer and housing Open and remove the service flap. If the washing machine contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer. To remove the insert: Push the insert upwards from below with your finger. -
Page 47: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Place the service flap back on, lock Filter in the water supply it into place, and close it. blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Press the A button. -
Page 48: Faults And What To Do About Them
Faults and what to do about them. Drain the water ~ Page 46 Faults and what to do Use a tool to pull the emergency release downwards and then about them. release. The washing machine door can then E mergency release be opened. -
Page 49: Information On The Display Panel
Faults and what to do about them. Information on the display panel Indicator/symbol Cause/remedy - P - and ÿ The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■... -
Page 50: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Faults Cause/remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the threaded joint on the supply hose. ■ The appliance is not filling Have you pressed the A button? ■... - Page 51 Faults and what to do about them. Faults Cause/remedy Water remaining in the Not a fault – the effectiveness of the care product is not affected. ■ care product Clean the insert if necessary. ■ compartment i . Odours in the washing Run the Drum Clean or Cottons 90 °C programme without laundry.
-
Page 52: After-Sales Service
After-sales service Faults Cause/remedy - P - and ÿ appear on the The door is unlocked. It is possible to add laundry. display panel when the cycle is paused. If you cannot rectify a fault yourself (after switching the machine off and then on again) or a repair is required: Switch off the appliance and pull the mains plug out of the socket. -
Page 53: Consumption Rates
Consumption rates Consumption rates E nergy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Program Load Energy Water Program consumption**... -
Page 54: Technical Data
Technical data Technical data D imensions: T e c h n i c a l d a t a 850 x 600 x 590 mm (height x width x depth) Weight: 70 - 85 kg (depending on model) Mains connection: Mains voltage 220 - 240 V, 50 Hz Nominal current 10 A Nominal power 1900 –... -
Page 55: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 56 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY *9001333074*...