HP Compaq Presario,Presario S3000 Installation Manual page 4

Getting the Mouse Ready
M2
M1
Note: Do not use rechargeable batteries in the
mouse. Alkaline batteries are
recommended.
2
Installing the Optical Wireless Mouse Set
M3
Install the two alkaline AA batteries (provided)
in the wireless mouse:
1 Push in at M1 and lift the battery cover (M2)
from the bottom of the mouse.
2 Insert the batteries into the compartment. Note
the battery images on the inside of the
compartment, and make sure batteries are
placed in the correct direction.
3 Replace the cover.
Note: The red light (M3) turns on when the
batteries are installed correctly.