Canon imageRUNNER ADVANCE C9075S PRO User Manual page 13

with the CDRH regulations and must be attached to laser products marketed in the
United States.
Caution
Use of controls, adjustments, or performance of procedures other than those specified in
this manual may result in hazardous radiation exposure. This is a semiconductor laser.
The maximum power of the laser diode is 21 mW and the wavelength is 658 nm.
Mercury (All Countries)
At the end of the equipment's service life the mercury-containing fluorescent lamp must
be removed from the equipment and treated separately according Directive 2002/96/EC
(Waste Electrical and Electronic Equipment). Dispose of in accordance with all federal,
state, and local regulations. The European Waste Catalogue (EWC) number of the
mercury-containing fluorescent lamp is: 20 01 12.
Battery Labeling (EU Only)
This product contains a battery. Please do not remove the battery. If the battery needs
replacement, this should be done only by authorized service technicians who are aware
of the removal instructions.
This product contains (a) button cell(s). It (They) is (are) located in (a) printed circuit
board(s) that is (are) essential for the continuous error-free functioning of the product.
The button cell(s) should be removed only by authorized service technicians who are
aware of the removal instructions.
Button cell specification
Button cell location
Motherboard
Caution: Canon / Océ does not accept any liability for any damage or consequences, if
the batteries are removed by persons other than Canon / Océ authorized service
technicians.
#
Button cell
capacity
220 mAh
Regulation notices
Contains the following
substances (if applicable)
Lithium
Chapter 2 - Regulation notices 13