Advertisement
4.
MAINTENANCE
4.1. CHANGING THE SPOTLIGHT BULB
WARNING! Ensure the spotlight is turned off and the lens has cooled
prior to changing the bulb.
1. Undo the spotlight hood (fig.1.A) by turning it anti-clockwise.
2. Carefully lift the reflector assembly revealing the spring clip (fig.5.1)
and the cable connector (fig.5.2).
3. Disconnect cable (fig.5.3).
4. Remove the spring clip (fig.5.1).
5. Pull bulb (fig.5.4) outward from the reflector.
6. Hold the new bulb with a lint free cloth, (do not handle the bulb),
install by reversing the above procedure.
WARNING! Beware of causing a short circuit.
4.2. CHANGING THE BATTERIES
WARNING! Ensure you read, understand and apply safety
instructions relating to the battery before changing.
1. Undo the spotlight hood (fig.1.A) by turning it anti-clockwise.
2. Carefully lift the hood and reflector assembly revealing the four
battery cover retaining screws (fig.6.1)
3. Disconnect wire (fig.6.3a) from bulb cable (fig.6.3b) .
WARNING! Beware of causing a short circuit.
4 Undo the four retaining screws.
5. Carefully raise the battery cover (fig.6.2).
6. Carefully remove battery terminal wires, noting cable connections,
then remove both batteries.
7. Replace with genuine Sealey batteries and install by reversing the
above procedure.
Notes: a) Take care not to pinch or misconnect any wires.
b) When replacing battery cover make sure that charging jack PCB
is slotted into supports before replacing screws.
8. Dispose of old batteries in accordance with local authority
lead-acid battery regulations. DO NOT dispose of with regular
refuse.
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for
recycling information.
WARNING! Ensure the spotlight is turned off before removing the battery
Refer to Section 4.2 to remove the battery.
Dispose of batteries according to local authority guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing
batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme.
Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Environmental Protection.
Battery Removal.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
AK437.V2
fig.5
1
fig.6
Issue: 2 - 17/02/10
Advertisement
