Cannot Print A Fax - Canon PIXMA MP830 User Manual

Cause
There was an error during reception.
The telephone line is not correctly
connected.
The machine is not set to the
appropriate receive mode.

Cannot Print a Fax

Cause
The machine's memory is full.
A paper size other than A4, LTR or
*1
LGL is loaded.
Paper is not loaded.
184 Troubleshooting
Check the LCD for an error message. See
Displayed on the LCD" on page
Print the Activity report and check for an error. See
Activity Report Manually" on page
Check that the telephone line is connected correctly to Telephone Line
Jack and that the telephone (or another external device such as an
answering machine or a computer modem) is connected correctly to
External Device Jack. Refer to the Easy Setup Instructions.
Check the receive mode setting (A), and change it to a mode suited to the
your connection if necessary.
– <FAX only>
See "If You Want to Receive Only Faxes Automatically with Your Machine,
or Have a Dedicated Telephone Line for Fax Use Only:" on page
– <Manual RX>
See "If You Receive Mainly Voice Calls and Sometimes Faxes, or Want to
Receive Faxes Manually:" on page
– <Ans mc. connect>
See "If You Want to Receive Voice Messages on Your Answering Machine
and Receive Faxes Automatically:" on page
– <F/T auto switch>
See "If You Want to Receive Faxes Automatically as well as Voice Calls:"
on page 120.
– <DRPD>
See "If You Have Subscribed to a Distinctive Ring Pattern Detection
(DRPD) Service with Your Telephone Company (US and Canada only):" on
page 121.
– <Network switch>
See "If You Want Your Machine to Automatically Switch between Fax and
Voice Calls by the Call Ring Patterns (Network Switch):" on page
Either print or delete documents in memory (see
Documents in Memory" on page
sender to resend the fax.
If a paper size other than A4, LTR or LGL
paper source, incoming faxes are not printed and are stored in memory.
Change the paper in the configured paper source to A4, LTR or LGL
then press [OK] on the machine. Load legal-sized
Sheet Feeder.
If there is no paper loaded in the configured paper source, the received fax
is stored in memory and not printed. Load some paper and press [OK] on
the machine.
Action
"An Error Message is
161.
105.
(A)
120.
120.
Action
"Printing a List of
113) to free up memory. Then ask the
*1
is loaded in the configured
*1
paper in the Auto
"Printing the
119.
121.
*1
size,
Chapter 11