Canon ZR Instruction Manual page 17

About the LCD Screen
The LCD screen built into this camcorder is a high precision product.
E
However, small black dots or bright points of light (red, blue or green) may appear
constantly on the LCD screen. This is not a malfunction of the LCD screen and
they are not recorded on the tape. (Effective dots: more than 99.99%)
Allowing the subject to monitor recording
When you lift the LCD panel up
vertically so that it faces the opposite
direction (see diagram opposite), you
can watch yourself during recording or
let your subject monitor recording.
• Screen displays are reversed (mirror mode) and the time code and remaining tape
indicators disappear. The recording itself is unaffected. Only certain displays are
shown (see below).
• To cancel mirror mode, simply bring the LCD panel back down, away from the
vertical.
Notes:
• While recording in mirror mode you cannot operate the menu.
• You can start/stop the self-timer during mirror mode, but you must set it at the
menu before turning the screen upright. You can also use the wireless controller.
No Cassette is loaded
Exposure Adjustment Exposure Adjustment
Manual focus
18
REC
REC PAUSE
EJECT
STOP
The tape has reached the end
AF
OFF
Condensation warning
The battery pack is exhausted
Self-Timer countdown
Photo mode AF/AE mark