Table of Contents
Advertisement
Problem
The sensor controls do
not respond.
appears in the
Power cut
display.
12:00
appears in the
display.
Max. op. hours reached
appears in the display.
and a fault code
Fault
not listed here appears
in the display.
This function is not available
appears in
at the moment
the display after
selecting the Descale
function.
Cause and remedy
You have selected the
setting. When the oven is switched off, the sensor
controls do not respond.
As soon as the oven is switched on, the sensor
controls will respond. If you want the sensor
controls to respond even when the oven is
switched off, select the
setting.
The oven is not connected to the power supply.
Check that the oven plug is correctly inserted into
the socket and switched on.
Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
Touch and hold the On/Off sensor control until
the display switches off and the oven restarts.
There has been a brief power cut. This has caused
the current cooking programme to stop.
Switch the oven off and then back on again.
Restart the cooking programme.
The power supply was interrupted for longer than
150 hours.
Reset the time and date.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off
function.
Confirm with OK.
The oven is now ready to use.
A fault has occurred that you cannot resolve.
Call the Miele Customer Service Department.
The steam injection system is faulty.
Call the Miele Customer Service Department.
Problem solving guide
Display
|
QuickTouch
|
Display
QuickTouch
|
Off
|
On
79
Advertisement
Table of Contents
