Quick Start Guide
For detailed instructions, see the reference page indicated in parentheses.
Recharge the battery.
1
Connect the battery to the battery charger
with the power cord.
The CHARGE lamp remains lit while the
battery is recharged. When the battery is
fully recharged (taking about 2 hours), the
CHARGE lamp will start blinking. (→p.22)
Attach a lens.
5
Align the red dots on the lens
and camera and turn the lens as
shown by the arrow until it snaps
in place. (→p.26)
Focus the subject.
9
Aim the Area AF over the subject
and press the shutter button
halfway to autofocus. (→p.59)
12
Load the battery.
2
Insert the battery into the battery
compartment and turn the
release handle as shown by the
arrow while pushing in the
battery. (→p.23)
On the lens, set the
6
focus mode switch to
<
>.
(→p.26)
Take the picture.
10
Press the shutter button fully to
take the picture. (→p.29)