Sony HDR-AS50R Read This First Manual page 55

selected camera, then press the REC/ENTER button on the camera.
After pairing is complete, a sound is heard.
Hint
The default Bluetooth setting for the camera is ON. When the Live-View Remote (RM-LVR3) is connected to
Wi-Fi for the first time, Bluetooth pairing with the camera is automatically completed, and the
displayed on the camera screen switches to
Note
When Airplane mode is ON, the Bluetooth icon does not appear on the screen, and Bluetooth
communications are disabled, even if the Bluetooth setting is ON.
The camera can be paired with up to 15 Bluetooth devices. If a 16th device is paired with the camera, the
pairing information of the first registered device is deleted.
When the camera is communicating via Bluetooth, another device cannot be paired.
When the camera is initialized, the pairing information is also reset. To pair again, the pairing information of
the connected compatible device should also be deleted.
When pairing is performed while shooting with the camera, a sound will not be heard.
[53] Changing the Settings
Bluetooth remote controller power setting
A device that has already been paired with the camera is able to turn the camera on and off.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
(Bluetooth remote controller power setting) - setting value, then press the
REC/ENTER button.
(Ability to turn the camera on/off with a corresponding device is enabled.)
(Ability to turn the camera on/off with a corresponding device is disabled.)
To enable this function, it is necessary to turn on the above setting and the Bluetooth setting of both
the camera and the corresponding device in advance.
For setting and operating the Live-View Remote (RM-LVR3), refer to "Bluetooth remote controller
power setting" in the help guide of the Live-View Remote.
http://rd1.sony.net/help/cam/1650/h_zz/
.
Camera settings
(Camera Settings) -
icon