Setting The Automatic Timer; Displaying And Changing Set Values - Bosch HVA531NS0/03 Instruction Manual

Table of Contents

Advertisement

Setting the timer
The timer has no influence on the functions of the oven. The
duration of the timer can be set to between 1 minute and 23
hours and 59 minutes.
Press the
button until the
0
1.
and three zeros are displayed.
Set the required cooking time with the "+" and "-" buttons.
2.
An audible signal sounds once the time has elapsed.
Notes
To change the remaining time, press the
symbol flashes on the display. Then change the remaining
V
time with the "+" and "-" buttons.
To cancel the setting, press the
flashes on the display. Then press the "+" and "-" buttons at
the same time.
Switching off the acoustic signal
Press the "
0
" button until the
After seven minutes, the signal switches off automatically.
Changing the audible signal
Three different audible signals are available.
Press the "+" and "-" buttons simultaneously.
1.
Press the
button.
0
2.
The current audible signal is shown in the display panel, e.g.
"Tone 1".
Press the "-" button to select a different audible signal.
3.

Setting the automatic timer

The electronic clock can be used to switch the oven on or off
automatically.
Automatic switch-off
Press the
0
button until the
1.
and three zeros are displayed.
Press the
0
function button again until "dur" and "0.00" flash
2.
alternately on the display panel and the "A" symbol flashes.
Set the cooking time with the "+" and "-" buttons.
3.
The cooking time can be set to between 1 minute and
10 hours.
Set the required heating function and temperature.
4.
The oven starts and the A symbol and the current clock time
appear on the display panel.
The cooking time has elapsed
An audible signal sounds, the
display panel and the A symbol flashes.
Switch off the temperature selector and function selector.
1.
Press the
0
button until the
2.
The oven switches back to manual mode.
8
symbol flashes on the display
V
button until the
0
0
button until the symbol
V
symbol disappears.
V
symbol flashes on the display
Û
symbol disappears from the
Û
symbol appears.
Automatic switch-on and switch-off
Baking or roasting starts for the set duration at a later time
which you chose.
Press the
button until the
0
1.
and three zeros are displayed.
Press the
function button again until "dur" and "0.00" flash
0
2.
alternately on the display panel and the "A" symbol flashes.
The current time may be 17:30, for example.
Set the cooking time (e.g. 1 hour) with the "+" and "-" buttons.
3.
The cooking time can be set to between 1 minute and
10 hours.
Press the
function button again until "End" and the switch-
0
4.
off time "18:30" (i.e. the current time plus the set cooking
time) flash alternately on the display panel.
Set the switch-off time (e.g. 19:30) using the "+" and "-"
5.
buttons.
The switch-off time can be set to up to 23 hours and
59 minutes.
Set the required heating function and temperature.
6.
The
Û
symbol disappears from the display panel.
In this example, the oven starts at 18:30 and switches off
again at 19:30.
The cooking time has elapsed
An audible signal sounds, the
display panel and the A symbol flashes.
Switch off the temperature selector and function selector.
1.
Press the
button until the
0
2.
The oven switches back to manual mode.

Displaying and changing set values

The set values and the remaining time for the various operating
modes of the electronic clock can be viewed and changed on
the display panel at any time.
Displaying the remaining time for the timer
Press the
button until the
0
The remaining time appears on the display and can be
changed with the "+" and "-" buttons.
Displaying and changing the cooking time and switch-off
time.
Press the
0
button until the
1.
panel.
Press the
button again until "dur" and the remaining
0
2.
cooking time flash alternately on the display panel and the A
symbol flashes.
The cooking time can be changed with the "+" and "-"
buttons. Press the "+" and "-" buttons at the same time to
switch off the automatic timer.
Press the
button again until "End" and the set switch-off
0
3.
time flash alternately on the display panel.
The switch-off time can be changed with the "+" and "-"
buttons. Press the "+" and "-" buttons at the same time to
switch off the automatic timer.
symbol flashes on the display
V
symbol disappears from the
Û
symbol appears.
Û
symbol flashes on the display.
V
V
symbol flashes on the display

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hva531ns06 seriesHva531ns0/04

Table of Contents