Table of Contents
Advertisement
Before washing for the first time
Run a wash cycle without any laundry
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Load items of laundry of varying sizes.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Adding detergent and care products
Amount of laundry, level of soiling, water hardness (ask your water
supply company) and manufacturer's instructions.
Models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in
During operation: Open the detergent drawer with care.
Dilute thick fabric softener and conditioner with water.
This prevents blockages.
Setting** and adjusting programmes
**If the
me selector
display panel, the childproof lock
is active
Function and option buttons
Individual settings, page 5.
Programme selector for switching
the machine on and off and for
selecting the programme. Can be
turned in either direction.
Select Start/Pause
If the function buttons are held for
the model) or
longer, the appliance automatically
pin, laundry soaks in the last
runs through the display options.
or end
page 9
page 7.
page 9.
Measure accordingly:
the drum.
1
symbol flashes on the
Deactivating, page 5.
2
Washing
Detergent drawer
with compartments I, II,
Washing machine door
Control panel
Washing machine
door handle
Service flap
Washing
3
Switching off
Turn the programme selector to Off.
Turning the tap off
Not required for Aqua-Stop models
Installation instructions, page 7.
Removing the laundry
Open the washing machine door and remove the laundry.
If - - - - (Rinse stop = no final spin) is active: Turn the
programme selector to Empty
Press Start/Pause
.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
End of programme when...
...
appears on the display panel.
Interrupting the programme
Programmes at high temperatures:
– To cool the laundry: Select Rinse
– Press Start/Pause
.
Programmes at lower temperatures:
3
– Select Spin
or Empty
(if only emptying: set
speed) to - - - -).
– Press Start/Pause
.
Changing the programme, if...
... a wrong programme has been selected by mistake:
– Reselect the programme.
– Press Start/Pause
. The new programme starts from
the beginning.
Pausing/continuing the
programme...
... e.g. for Pause
page 9.
Press Start/Pause
. - - appears on the display panel;
washing machine door cannot be opened. To continue
the programme, press Start/Pause
or select a spin speed.
.
(spin
.
4
Advertisement
Table of Contents
