JVC NX-DD30 Instructions Manual page 40

(Continued)
Playing Back MP3/WMA/JPEG/ASF and DivX Discs
4
Press
5
Press or
Example: Display during playback
• At first, a track title (file name) is scrolled.
• When an MP3 or WMA disc is loaded, tag infor-
mation (title/artist/album) is scrolled followed by
a track title.
• Only alphanumerical one-byte characters are
displayed properly as a track title or tag informa-
tion.
Notes for creating files/groups
• Use correct extensions (Upper case letters and
lower case letters can be mixed).
MP3 file: ".MP3" ".mp3"
WMA file: ".WMA" ".wma"
JPEG file: ".JPEG" ".JPG" ".jpeg" ".jpg"
• Use only single byte alphanumeric characters
for file names and group names.
Notes for creating CD-R/RW discs
• Disc format should be "ISO 9660"
• Packet Write Method (UDF format) should not
be used.
• Make sure that the disc is finalized.
Notes for creating DVD-R/RW discs
• Use UDF Bridge format.
NOTE
• You can also use
• You can also use the number buttons in step 4. In
this case, steps 3 and 5 are not needed. Refer to
"Using the number buttons" (
• You can also use
case, step 3 is not needed.
Slide-show playback
• For a JPEG disc, when you press
5, files are continuously played back from the
selected file (slide-show playback). When you
press , only a selected file is played back.
• A file is displayed for approximately 3 seconds
in a slide-show playback.
• After all files are played back, the playback is
automatically stopped.
37
to select a track.
.
and in step 2.
page 18).
or in step 4. In this
in step
For the locations of remote control
buttons, refer to page 36.