Canon 1064C001 Operation Manual page 232

S311 Working error in external input/output
service [err]
Description cannot work extio [%1][%2][%3]
(S311)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the external
input/output device service was
running.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
S312 Working error in timer service [err]
Description cannot work timer [%1][%2][%3]
(S312)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in the timer
service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
S320 PAN/TILT operation error [err]
Description %1 error occurred. [%2] (S320)
%1 PAN | TILT
%2 Warning details
Meaning An error occurred during operation or
stopping of PAN/TILT.
Countermeasure Check that the camera is not touching
the dome, etc.
If the error is not caused by problems
such as contact with peripheral items,
the camera is faulty. Arrange for
servicing.
S330 Failure of fan [err]
Description fan [%1] is stopped (S330)
%1 Fan number
Meaning Detected that the fan is not rotating or
the rotation speed has significantly
decreased.
Countermeasure If the problem persists after rebooting,
the fan may have failed. Arrange for
servicing.
S331 Failure of heater [err]
Description HEATER [%1] failure (S331)
%1 Heater number
Meaning An abnormality was detected when
using the heater.
Countermeasure There may be a connection problem
with the heater unit you attached, so
check the connections. If the problem
persists after rebooting, the heater may
have failed. Arrange for servicing.
S410 Event service initialization error [crit]
Description event initialization error [%1][%2]
(S410)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of
the event service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
S411 External input/output service
initialization error [crit]
Description extio initialization error [%1][%2]
(S411)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of
the external input/output device
service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
S412 Timer service initialization error [crit]
Description timer initialization error [%1][%2]
(S412)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of
the timer service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
6
231