Bosch Exxcel WVD24520GB Operating And Installation Instructions page 33

Finish in time
Example of Easy-Care 40 °C
programme:
33
Before a programme starts, you can specify by how
many hours later the programme is to be ended.
Touch the 5 button, the display shows the
■
minimum finish in time of the selected
programme. Such as 1h, i.e.1 hours.
² The minimum finish in time of different programmes
are different. It depends on the duration of selected
programme.
Touch the 5 button until the desired number of
■
hours is displayed.
² The finish in time can be set in 1-hour steps. The
time can be delayed up to a maximum of 24h. If a
finish in time of 24h has been set, the programme
duration mode can be accessed by touching the 5
button again.
You can change other settings
or
Touch the Start/Pause P button.
■
The finish in time starts counting down.
The first segment of the progress bar flashes.
² The finish in time is counted down by the hour.
When the finish in time has elapsed, the programme
starts automatically and the programme duration is
displayed.
² Changes to the finish in time or an immediate start
are possible. To do this:
– Touch the Start/Pause P button. The
programme duration time appears.
– Touch the Start/Pause P button directly to start
the programme immediately. If required, reset
the finish in time.
– Touch the Start/Pause P button.