Advertisement

Quick Links

Register your product and get support at
www.philips.com/welcome
EN User Manual
55PFL76x6H
47PFL76x6H
42PFL76x6H
37PFL76x6H
32PFL76x6H
55PFL76x6K
47PFL76x6K
42PFL76x6K
37PFL76x6K
32PFL76x6K
55PFL76x6T
47PFL76x6T
42PFL76x6T
37PFL76x6T
32PFL76x6T

Advertisement

Table of Contents
loading

Summary of Contents for Philips 55PFL76 6H Series

  • Page 1 Register your product and get support at www.philips.com/welcome 55PFL76x6H 47PFL76x6H 42PFL76x6H 37PFL76x6H 32PFL76x6H 55PFL76x6K 47PFL76x6K 42PFL76x6K 37PFL76x6K 32PFL76x6K 55PFL76x6T 47PFL76x6T 42PFL76x6T 37PFL76x6T 32PFL76x6T EN User Manual...
  • Page 2: Table Of Contents

    Contents Get started Troubleshooting TV tour Contact Philips Important General TV Environmental efforts TV channel Position the TV Picture Help and support Sound HDMI Use your TV Controls Network Watch TV Product specifications Watch a connected device Watch 3D Power and reception...
  • Page 3: Get Started

    1 Get started TV tour Remote control To open or close the Find menu. In the Find menu, access the channel list. To adjust the volume. To open or close the Adjust menu. In the Adjust menu, access a range of frequently used settings.
  • Page 4 Press and hold to return to watching TV. Connect devices To select a red menu option, access digital Interactive TV services*, or watch TV demonstration clips. *Available on certain models only. For the best picture and sound quality, To select a green menu option or to access connect a DVD, Blu-ray disc player, or game energy efficient settings.
  • Page 5 TV. Net TV offers movies, pictures, music setup menu. and much more. For more information about the availability Read more in Use your TV > Browse Net of HD channels in your country, contact your Philips dealer or visit www.philips.com/support.
  • Page 6: Important

    TV, disconnect the TV from fire. the power outlet immediately. Contact Risk of injury or damage to the TV! Philips Consumer Care to have the TV checked before use. Two people are required to lift and carry a TV that weighs more than 25kg When the TV is swivelled, ensure that or 55lbs.
  • Page 7 Before you connect the TV to the Low temperatures power outlet, ensure that the power If the TV is transported in temperatures voltage matches the value printed on below 5°C or 41°F, unpack the TV and the back of the TV. Never connect the wait until the TV temperature matches TV to the power outlet if the voltage is room temperature before connecting...
  • Page 8: Environmental Efforts

    Environmental efforts with high quality materials and components, which can be recycled and reused. Energy efficiency Philips continuously focuses on lowering the environmental impact of our innovative consumer products. We aim our efforts towards environmental improvements during manufacturing, reduction of harmful substances, energy-efficient use, end-of-life instructions and product recycling.
  • Page 9: Position The Tv

    The ideal distance from which to watch When this crossed-out wheeled bin symbol TV is three times its diagonal screen is attached to a product it means that the size. For example, if the diagonal screen product is covered by the European size of the TV is 116cm / 46", the ideal Directive 2002/96/EC.
  • Page 10: Help And Support

    Yellow button. Online support If you can't find what you need in the onscreen [Help], consult our online support at www.philips.com/support. Location Follow the website instructions to select A range of TV settings are applied to suit the your language, then enter your product location of the TV.
  • Page 11 Contact Philips If you like, you can contact Philips Consumer Care in your country for support. You can find the contact number in the leaflet accompanying the TV. Before you contact Philips, note down your TV model and serial number. You can find this information on the back of your TV or on its packaging.
  • Page 12: Use Your Tv

    2 Use your TV Indicators Controls TV controls 1. Ambient sensor / remote control sensor Ambient sensor is available on certain models only. Remote control +/-: Increase or decrease volume. 2. AMBILIGHT: Switch Ambilight on or off. Ambilight is available on certain models only. (Home): Access the Home menu.
  • Page 13 4. (Home): Access the Home menu. Caution: The battery contains perchlorate (Navigation buttons): Navigate material, handle it with care. For information, through menus and select items. 6. CH - / CH + (Previous/Next): Switch www.dtsc.ca.gov/hazardouswaste/perchlorat channels, navigate through menu pages, tracks, albums or folders.
  • Page 14: Watch Tv

    You can also view a slideshow of the images in your smartphone on the TV. To download the application 'Philips My Remote', visit the Apple Apps store or the Android Market. Follow the instructions provided at the applications store.
  • Page 15 Press +/- on the front of the TV. If the TV is in standby, press on the remote control. Note: There is a short delay before the TV responds. Tip: If you cannot find your remote control and want to switch on the TV from standby, press CH +/- on the front of the TV.
  • Page 16 Set programme guide Manage channel lists Before you use the programme guide, check You can view all channels, or only a list of the following settings: your favourite channels. Press FIND to 1. Press . access the channel list. 2. Select [Setup] > [TV settings] > Create a list of your favourite channels [Preferences] >...
  • Page 17: Watch A Connected Device

    [Vivid]: Rich and dynamic settings, ideal [Super zoom]: Remove the black bars for daytime viewing. on the sides of 4:3 broadcasts. Not [Natural]: Natural picture settings. recommended for HD or PC. [Movie expand 16:9]: Scale 4:3 format [Cinema]: Ideal settings for movies. to 16:9.
  • Page 18: Watch 3D

    Your TV is a 3D TV. To watch 3D, you can View picture use the Philips Easy 3D glasses, included with Press the Navigation buttons to select a this TV. You can purchase additional Philips picture, then press OK.
  • Page 19: Ambilight

    Note: The 2D/3D menu is only available Before you watch 3D, read the health warning information in Get started > when the TV receives 3D content from the Important > 3D Health warning (Page 7). input signal, or when [3D format] has been set to [3D - Side by side] or [3D - Top / Note: Passive 3D glasses from other bottom].
  • Page 20 1. While you watch TV, press > [Setup]. What you need 2. Select [TV settings] > [Ambilight]. 3. Select a setting to adjust: [Dynamic]: Adjust Ambilight between relaxed and dynamic levels. Available only if Ambilight [Colour] is set to [Dynamic]. [Brightness]: Adjust the brightness of Ambilight.
  • Page 21: Browse Pc Through Dlna

    A green tick appears next to the device. Play (uPnP) router. By default, Windows Media Player shares files from these folders: My A Philips wireless USB adapter or a LAN cable that connects your TV to Music, My Pictures, and My Videos. your home network.
  • Page 22: Net Tv And Online Video

    Find out more on Net TV services at the from the computer, make sure that the TV is Net TV forum website, connected to the home network, and the www.supportforum.philips.com. media server software is properly set up. Notes: 1. Switch on the computer and the router.
  • Page 23 To leave adult services unlocked, select 2. On your TV, configure Net TV. [Leave unlocked], then press OK. 3. On your PC, register with Philips to enjoy exclusive benefits and receive updates on 6. To lock, enter a 4-digit code, then press product information.
  • Page 24 1. Press . 1. Open a video store. You may need to 2. Select [Setup] > [Network settings]. register or enter your login. 3. Select [Clear Net TV memory], then 2. Select a video. press OK. 3. Make the online payment. 4.
  • Page 25: Games

    1. Switch on the TV. If you cancel a download, you can still 2. As illustrated, insert the SD memory card download the video until the rental period into the SD card slot on the side of the TV. expires. The TV automatically starts formatting the Watch video card.
  • Page 26 What you need Use the two-player kit that comes with two pairs of glasses - Philips PTA436 (sold separately). Connect the game console to the HDMI connector on this TV.
  • Page 27: Use More Of Your Tv

    3 Use more of Do not overload the USB port. If you connect a USB hard disk device that consumes more than 500 mA power, your TV ensure that it is connected to its own external power supply. Once the USB hard disk device is Pause TV formatted for this TV, you cannot use it on another TV or PC.
  • Page 28: Record Tv Shows

    Pause a live TV broadcast Start a programme recording. Switch the TV to standby. Switch to another channel. Switch source to watch from a connected device - a Blu-ray disc player or digital receiver. To change playback speed Press repeatedly. To jump back to the beginning of the TV broadcast Press the left navigation button repeatedly...
  • Page 29 Note: If you are using a USB hub, do not To check if the programme guide supports recording: connect any other USB device to the TV when you are formatting the USB hard disk. Press and select [Programme guide]. If you find a [TV Recording] button on the programme guide page, you can set up and manage recordings.
  • Page 30 Set a timed recording If your TV remote control does not have a To manually set a recording that is not linked button: to any programme: 1. Press and select [Programme guide]. 1. From the programme guide page, press 2. With the current TV programme selected, OPTIONS, select [Manual record], and press OPTIONS and select [Record].
  • Page 31: Enjoy Hbbtv

    1. Select the recording in the list and press Access HbbTV OPTIONS. When you tune to a TV channel that offers 2. Select [Delete recording] and press OK. HbbTV, the interactive pages will open Cancel a scheduled recording automatically or, at some point, you will be invited to open them.
  • Page 32: View Teletext

    1. Press . View Teletext 2. Select [Setup] > [Channel settings] or [Satellite settings]. 3. Select [Languages] > [Primary Text] or Select a page [Secondary Text]. 1. Select a channel that has teletext feature, 4. Select your preferred teletext languages, then press TEXT.
  • Page 33: Set Locks And Timers

    To switch Teletext 2.5 on or off 1. In the [Clock] menu, select [Date] or [Time], then press OK. 1. Press . 2. Select [Setup] > [TV settings] > 2. Use the Navigation buttons to make your [Preferences]. selection. 3. Select [Text 2.5] > [On] or [Off], then 3.
  • Page 34: View Subtitles

    Parental rating Subtitle language Some digital broadcasters rate their You can change the subtitle language on programmes according to age. You can set some digital channels. your TV to display only programmes with 1. Press . age ratings lower than your child's age. 2.
  • Page 35: Use Easylink

    Philips EasyLink. You can hear a connected HDMI-CEC compliant device through the TV speakers, After you switch on Philips EasyLink, these even when the TV is in standby. features are available: To switch on, see Use more of your TV >...
  • Page 36 Switch on connected device. To switch on or off EasyLink : Display the TV menu. Note: If you do not intend to use Philips (Standby): Switch the TV and the Easylink, switch it off. connected device to standby. 1. Press .
  • Page 37 TV is in standby. 1. Press ADJUST to receive audio from [TV]: On by default. the connected Philips EasyLink device. Stream TV audio through the TV and If available, audio only mode is enabled. the connected HDMI-CEC audio 2.
  • Page 38: Set Up Your Tv

    4 Set up your TV [Pixel Plus HD]/ [Pixel Precise HD]: Access advanced settings, including [HD Natural Motion], *[Perfect Natural Motion], [Clear LCD], [Super Settings assistant resolution], [Dynamic contrast], [Dynamic backlight], [MPEG artefact Use the settings assistant to guide you reduction], [Colour enhancement], through the picture and sound settings.
  • Page 39: Channels

    Audio settings Channels Select audio language If the TV channel has multiple or dual sound Reorder and rename broadcast, you can select the preferred audio language. Reorder channels While you watch TV, press OPTIONS. After the channels are installed, you can [Audio language]: Select the audio reorder the channel list to your preference.
  • Page 40 Update channel list 4. Select one of the following settings: [Antenna (DVB-T)]: Access free-to-air When the TV was switched on for the first time, a full installation of channels was antenna or digital DVB-T channels. performed. [Cable]: Access cable or digital DVB-C You can automatically add or remove digital channels.
  • Page 41 If you receive the channel with DVB-C, You can copy channel lists from one Philips select [Automatic] in [Symbol rate TV to another through a USB storage mode] unless your cable provider device.
  • Page 42: Menu Language

    4. If the country setting on the TV is different the same hardware type, as indicated from that of the TV whose channel list you by the sticker on the back of the TV, want to copy, reinstall the TV and select the (for example Qxxx.xx.Lx), and country setting to match the first TV.
  • Page 43: Other Settings

    To switch on hearing impaired audio and Audio feedback for the visually impaired subtitles This feature enables audio feedback when 1. While you watch TV, press OPTIONS. buttons are pressed on the remote control 2. Press one of the following buttons to or TV.
  • Page 44 3. In your web browser, navigate to through a router with a high-speed www.philips.com/support. connection. 4. At the Philips Support site, find your product and locate the [Help] file for your 1. Press > [Setup] > [Update software], then press OK.
  • Page 45: Reinstall The Tv

    If an error occurs during the update, retry the procedure. If the error reoccurs, contact Philips Consumer Care. 1. Switch on the TV. 2. Disconnect all other USB devices from the 3.
  • Page 46: Connect Your Tv

    5 Connect your Do not use an HDMI cable longer than 5 meters / 16.4 feet. About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available.
  • Page 47: Connect Devices

    SCART A SCART cable combines video and audio Use this connection to display PC content signals. on the TV. SCART connectors can handle RGB video For video and sound, use the VGA and signals but cannot handle high-definition AUDIO IN connectors. (HD) TV signals.
  • Page 48 Blu-ray or DVD disc player Connect the disc player with an HDMI cable to the TV. Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV. TV receiver Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on certain models only.)
  • Page 49 Connect the satellite or digital TV receiver with an HDMI cable to the TV. Connect the satellite or digital TV receiver with a SCART cable to the TV. Connect the satellite or digital TV receiver with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
  • Page 50 Recorder Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.) Connect the recorder with a SCART cable to the TV. Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. For the best gaming experience, set the TV Game console to game mode.
  • Page 51 Connect the game console with an HDMI cable to the TV. Connect the game console with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Home theatre system Connect the home theatre with an HDMI cable and an optical cable to the TV.
  • Page 52 Connect the home theatre with a SCART cable to the TV. Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Digital camera Connect the digital camera with a USB cable to the TV.
  • Page 53: Connect More Devices

    Digital camcorder Connect the digital camera with an HDMI cable to the TV. Connect the digital camcorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Connect more devices External hard disk Connect the external hard disk with a USB cable to the TV.
  • Page 54 Computer Connect the computer with an HDMI cable to the TV. Connect the computer with a DVI-HDMI cable to the TV. Connect the computer with a VGA cable and an audio cable to the TV. To install the USB keyboard Keyboard and mouse Switch on the TV.
  • Page 55: Computers And The Internet

    If you have selected a Cyrillic or Greek Once the TV detects the mouse, set the keyboard layout first, you can also add a tracking speed. Navigate into the test area to second keyboard with Latin layout. check the speed. To use the USB mouse with your TV To change the keyboard layout setting, press >...
  • Page 56 Wi-Fi MediaConnect Connect With Wi-Fi MediaConnect you can bring up (project) your PC screen on the TV screen wirelessly. You start Wi-Fi MediaConnect from your PC. See Connect your TV > Computers and the Internet > (Page 59). What you need Warning: This TV complies with the EMC directive only when you use a shielded Cat5 ethernet cable.
  • Page 57 Wireless LAN ready Most new wireless routers have the WPS system and carry the WPS logo. The WPS This section is only for wireless ready TVs. system uses WPA security encryption and With the Wireless USB adapter PTA01 cannot be combined with devices on your accessory (sold separately), you can connect network that use the WEP security the TV to your home network wirelessly.
  • Page 58 Start wireless setup Find this hexadecimal key in the router 1. Switch on your wireless network router. software on your PC. Write down the first 2. Press on the TV remote control. key of the WEP keys list and enter it on the 3.
  • Page 59 For the availability of the wireless USB adapter, check with your local retailers or Start projecting buy online at www.philips.com/tv. To start projecting the PC screen on the TV, click on the small TV-like icon in the taskbar at the bottom right of the PC screen. Your...
  • Page 60: Common Interface

    Stop projecting If a CAM is inserted and subscription fees are paid, you can watch the channel. The To stop projecting, click on the TV icon applications, functions, the content and the again. onscreen messages vary for each CAM Project your PC: Help service.
  • Page 61 Watch CAM services 1. After inserting and activating the CAM, press OPTIONS. 2. Select [Common interface], then press 3. Select the CAM provider and press OK.
  • Page 62: Troubleshooting

    TV chassis: this TV at www.philips.com/support. No action is required. The creaking sound is You can also contact Philips Consumer Care due to the normal expansion and in your country for support. You can find the contraction of the TV as it cools and warms contact number in the leaflet that up.
  • Page 63: Picture

    The picture from broadcasts is scrambled: Picture You may need a Conditional Access Module to access content. Check with your service The TV is on, but there is no picture or the operator. picture is distorted: An "e-sticker" banner displaying Make sure that the antenna is properly information appears on the TV display: connected to the TV.
  • Page 64: Hdmi

    HDMI Audio and picture files do not play or display smoothly: There are problems with HDMI devices: The transfer performance of the USB storage device may limit the data transfer Note that HDCP (High-bandwidth rate to the TV which causes poor playback. Digital Content Protection) support can delay the time taken for a TV to display content from a HDMI device.
  • Page 65: Product Specifications

    - For PFL7x06 series: 24 W - For PFL7xx6 series: 28 W For power consumption, see the product specifications at Incredible Surround www.philips.com/support. Clear Sound Dynamic Bass Enhancement The power rating stated on the product typeplate is the power consumption for this...
  • Page 66: Multimedia

    Video formats Multimedia (Resolution - refresh rate) 480i - 60 Hz Supported multimedia connections 480p - 60 Hz USB : NTFS, FAT 16, FAT 32. Connect 576i - 50 Hz only USB devices which consume 576p - 50 Hz 500mA of power or less. 720p - 50Hz, 60 Hz SD card (Videostore) 1080i - 50Hz, 60 Hz...
  • Page 67: Dimensions

    Service port: SERV.U Headphones: stereo 3.5mm mini-jack SAT: F-pin (Satellite). Available on Dimensions certain models only. Bottom Note: Dimensions and weights are Ethernet LAN RJ-45 approximate values only. Design and DIGITAL AUDIO OUT: Optical specifications are subject to change without HDMI 1 - 3 notice.
  • Page 68: Help Version

    Use your TV legend to note the dimensions of your TV (with and without the stand). Use your TV legend to note the thickness of your TV (with and without the stand). Help version UMv 3139 137 04523 - 20120305...
  • Page 69: Index

    - 4 8 Index contact information, on Internet - 10 contact Philips - 11 controls - 12 3D - 18 3D glasses - 8 3D, health warning - 7 demo - 43 devices, add - 17 devices, watch - 17...
  • Page 70 picture format - 38 picture settings - 38 HbbTV - 31 Pixel Plus link - 37 HbbTV, block reception - 31 placement, stand or wall mount - 9 HDMI - 46 position the TV - 9 HDMI ARC - 46 power - 65 hearing impaired - 42 help, onscreen - 10...
  • Page 71 subtitle, language - 34 switch TV on, off - 14 teletext 2.5 - 32 teletext, digital text - 32 teletext, dual screen - 32 teletext, enlarge - 32 teletext, language - 32 teletext, search - 32 teletext, subpages - 32 two-player games - 26 universal access, enable - 42 universal access, hearing impaired - 42...
  • Page 72 © 2012 TP Vision Netherlands B.V. All rights reserved. Document order number 313913704523_edited...

Table of Contents