Main circuit terminals
2.5
Main circuit terminals
2.5.1
Details on the main circuit terminals
Terminal
Terminal name
symbol
R/L1,
S/L2,
AC power input
T/L3
U, V, W
Inverter output
P/+, N/-
Brake unit connection
P/+, P1
—
Earth (ground)
Available when used in the common bus regeneration mode
2.5.2
Terminal layout of the main circuit terminals,
wiring of power supply and the motor
FR-A846-00023(0.4K) to FR-A846-00170(5.5K)
Charge lamp
R/L1 S/L2 T/L3
Power supply
26
INSTALLATION AND WIRING
Connect these terminals to the commercial power supply.
Do not connect anything to these terminals when using the high power factor
converter (FR-HC2), multifunction regeneration converter (FR-XC)
regeneration common converter (FR-CV).
Connect these terminals to a three-phase squirrel cage motor or a PM motor.
Connect the brake unit (FR-BU2, FR-BU, BU), power regeneration common
converter (FR-CV), power regeneration converter (MT-RC), high power factor
converter (FR-HC2), multifunction regeneration converter (FR-XC), or DC power
supply (under DC feeding mode).
Do not remove the jumper across terminals P/+ and P1 except for connecting the
power regeneration common converter (FR-CV), multifunction regeneration
converter (FR-XC)
, or the high power factor converter (FR-HC2).
For earthing (grounding) the inverter chassis. This must be earthed (grounded).
Jumper
N/-
P/+
M
Motor
Terminal function description
FR-A846-00250(7.5K) to FR-A846-00470(18.5K)
Charge lamp
R/L1 S/L2 T/L3 N/-
Power supply
Refer to
page
—
, or the power
—
63
—
33
Jumper
P/+
M
Motor