Package Contents; Assembly And Adjustments - DeWalt DCS690N Manual

English
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other
e
than the designated D
D WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCS690 operates on a 54(60 Max) volt battery pack.
These battery packs may be used: DCB546,
DCB547,DCB606,DCB609. Refer to Technical Data for
more information.

Package Contents

The package contains:
1 Cut off tool
1 Diamond blade (X2 version only)
1 12.7 mm wrench
1 Battery charger (X2 version only)
2 Li-Ion battery packs (X2 version only)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
10
WALT batteries with a
e
Risk of dust emission.
Higher risk of kickback! Do not use the upper quarter
of the wheel for cutting.
Date Code Position (Fig. A)
The date code 14 , which also includes the year of manufacture,
is printed into the housing.
Example:
2021 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Main handle
1
Trigger switch
2
Lock-off button
3
Battery door
4
12.7 mm wrench
5
LED light
6
Front handle
7
Guard
8
Intended Use
Your cut-off tool is designed for professional cutting
applications. Only use wet cut method when cutting concrete.
Dry cutting is possible when cutting metal.
DO nOT use in the presence of flammable liquids or gases.
Your cut-off tool is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
• DO nOT cut concrete without connecting the water
supply system.

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. Make sure the
trigger switch is in the OFF position. An accidental start-up
can cause injury.

WARNING: Use only D
Arbor screw
9
Spindle lock button
10
Guard rotation lever
11
Shoe
12
Water valve
13
Date code
14
Water inlet
15
WALT battery packs and chargers.
e