1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. HP OmniBook 900
  6. User handbook manual

HP OmniBook 900 User Handbook Manual

Hp omnibook 900: user guide
Hide thumbs Also See for OmniBook 900:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Reference Manual
HP OmniBook 900
User's Handbook

Advertisement

Table of Contents
loading

Related Manuals for HP OmniBook 900

Summary of Contents for HP OmniBook 900

  • Page 1 HP OmniBook 900 User’s Handbook...
  • Page 2 Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
  • Page 3 CD-ROM: (i) The product Recovery CD-ROM and/or support utility software may only be used for restoring the hard disk of the HP computer with which the product Recovery CD-ROM was originally provided. (ii) The use of any operating system software by Microsoft contained in any such product Recovery CD-ROM shall be governed by the Microsoft End User License Agreement (EULA).
  • Page 4 Transfer of Rights in Software. Customer may transfer rights in the software to a third party only as part of the transfer of all rights and only if Customer obtains the prior agreement of the third party to be bound by the terms of this License Agreement. Upon such a transfer, Customer agrees that his/her rights in the software are terminated and that he/she will either destroy his/her copies and adaptations or deliver them to the third party.

  • Page 5: Table Of Contents

    To use the embedded keypad ... 28 Working in Comfort... 29 About Repetitive Strain Injury ... 29 Preparing Your Work Environment ... 31 Setting Up Your HP Computing Equipment... 33 Comfort and Safety Checklist ... 38 Your HP OmniBook Computer... 40 Managing Battery Power ... 43 How Power is Managed...
  • Page 6 To respond to a low-battery warning ... 47 To recharge a battery... 47 To replace the battery... 49 Expanding the OmniBook... 51 Using the External Module Bay... 52 To install hot-swap support... 52 To remove or install the bay or module ... 53 Connecting External Devices...
  • Page 7 Recovering Software... 92 To recover the factory installation of Windows... 93 To create a Support Utility Disk ... 94 Support and Service ... 95 Getting HP OmniBook Assistance... 96 Support Assistance... 96 Electronic Support Services ... 96 Repair Assistance... 97 Customer Support Centers ...

  • Page 9: Introducing The Omnibook

    Introducing the OmniBook User’s Handbook...

  • Page 10: Getting More Information

    This is shipped with your OmniBook and contains information about using the manual standard features of the version of Microsoft Windows shipped with your computer. OmniBook website http://www.hp.com/omnibook. http://www.europe.hp.com/omnibook (European mirror). HP Customer Care http://www.hp.com/cposupport/eschome.html. website Corporate This provides information about installing alternate operating systems, as well as Evaluator’s Guide...

  • Page 11: Taking Inventory

    Taking Inventory The HP OmniBook 900 represents a category of HP notebook computers for highly mobile professionals who want a notebook PC with the performance and expansion for everyday use, as well as the portability to take it everywhere. Included in the OmniBook box HP OmniBook 900.

  • Page 12: Omnibook Features

    Introducing the OmniBook OmniBook Features OmniBook Features OmniBook—Front View 1. Built-in microphone. 2. Keyboard lights (left to right: caps lock, keypad lock, num lock, scroll lock). 3. Blue power button. Turns the OmniBook on and off. 4. Pointing stick (pointing device). 5.

  • Page 13: Omnibook-Side View

    OmniBook—Side View 12. PS/2 keyboard or PS/2 mouse port (supports Y adapter). 13. System-off button. 14. Infrared port. Windows NT 4.0 does not support infrared communication. Use this port for wireless data transmission between the OmniBook and another computer or a printer with an infrared port.

  • Page 14: Omnibook-Back View

    Introducing the OmniBook OmniBook Features OmniBook—Back View 20. Kensington lock slot (security connector). 21. Serial port (COM1). 22. Parallel port (LPT1). OmniBook—External Module Bay 26. External module bay. User’s Handbook 23. External monitor port. 24. Universal Serial Bus (USB) port. 25.

  • Page 15: Setting Up For The First Time

    To set up the OmniBook and Windows CAUTION Use only the HP adapter shipped with the OmniBook (or other approved adapter). Using any other ac adapter could damage the OmniBook and may void your warranty. Refer to the warranty statement for your product.
  • Page 16 Year 2000 Hewlett-Packard makes no representation or warranty about the Year 2000 readiness of non-HP products including pre-installed operating systems or application software. Customer should contact the software manufacturer directly to determine if any additional actions by Customer are necessary to ensure compliance.

  • Page 17: To Connect The Floppy Disk Drive

    For suggestions about taking care of your OmniBook, see the chapter titled “Operating the OmniBook” in the online Reference Guide. To connect the floppy disk drive 1. Insert the floppy disk drive into the external module bay. If this is your only plug-in module, you can leave it in the module bay.

  • Page 19: Operating The Omnibook

    Operating the OmniBook User’s Handbook...

  • Page 20: Starting And Stopping The Omnibook

    Operating the OmniBook Starting and Stopping the OmniBook Starting and Stopping the OmniBook You can easily start and stop your OmniBook using the blue power button. However, at certain times, you may want to use other methods for starting and stopping your OmniBook—depending on power considerations, types of active connections, and start- up time.

  • Page 21: To Reset The Omnibook

    3. After the computer shuts down, press the blue power button to turn it on. Hint To boot from a CD-ROM or DVD drive in the external module bay, press ESC two times during reboot when you see the HP logo. Then select the CD-ROM/DVD drive as the temporary boot device. Operating the OmniBook Starting and Stopping the OmniBook User’s Handbook...

  • Page 22: Checking The Status Of The Omnibook

    Operating the OmniBook Checking the Status of the OmniBook Checking the Status of the OmniBook To check power status and drive activity The OmniBook has status lights that report power status and drive activity. When the floppy disk drive is installed in the external module bay, the following lights are present on the front of the OmniBook and the external module bay.

  • Page 23: Using The Omnibook Pointing Devices

    Using the OmniBook Pointing Devices Two pointing devices (pointing stick and touch pad) are built into your OmniBook. 1. Pointing stick (pressure-sensitive pointing device). 2. Touch pad (touch-sensitive pointing device). 3. Click buttons (two above and two below the touch pad). Both pointing devices use these click buttons, which work like the right and left buttons on a standard mouse.

  • Page 24: To Use The Built-In Pointing Devices

    Under Windows 2000, enhanced features for the pointing stick and touch pad are not available at this time. Check the Customer Care website (http://www.hp.com/cposupport/eschome.html) for PS/2 TrackPoint and touch pad device drivers for Windows 2000. The default pointing device driver is the standard PS/2 Compatible Mouse driver.

  • Page 25: Using The Omnibook Display

    Using the OmniBook Display The OmniBook display normally turns off when you close the display lid. To make the OmniBook suspend instead, see the section “Using the OmniBook Display” in the online Reference Guide. To adjust the display brightness The OmniBook uses special key combinations, called hot keys, to control brightness. Press Fn+F1 to decrease the brightness.

  • Page 26: Adjusting The Audio System

    Operating the OmniBook Adjusting the Audio System Adjusting the Audio System The OmniBook supports Sound Blaster Pro-compatible sound and the Microsoft Windows Sound System. To adjust the volume On the Keyboard To increase the volume, press Fn+UP-ARROW. To decrease the volume, press Fn+DOWN-ARROW. To temporarily silence the speaker without changing the volume setting, press Fn+F7.

  • Page 27: Using The Omnibook Keyboard

    For information about reducing your risk, see Working in Comfort in the online OmniBook Library, or visit our ergonomics website, http://www.hp.com/ergo. If you are using your portable computer as your primary computer, or using it for extended periods, you should use it with a full-size keyboard, monitor, and mouse.

  • Page 28: To Use The Embedded Keypad

    Operating the OmniBook Using the OmniBook Keyboard To use the embedded keypad When the embedded keypad on the OmniBook’s built-in keyboard is active, two options are possible. Num Lock on Keys change to the numeric or arithmetic designations printed in light gray on the keyboard.

  • Page 29: Working In Comfort

    Thank you for selecting HP computing equipment. To optimize your comfort and productivity, it is important that you set up your work area correctly and use your HP equipment properly. With that in mind, we have developed some set-up and use recommendations for you to follow based on established ergonomic principles.
  • Page 30 Operating the OmniBook Working in Comfort RSI has been a reported problem for those who perform repetitive tasks such as assembly line work, meatpacking, sewing, playing musical instruments, and computer work. RSI also has been observed in those who frequently engage in activities such as carpentry, knitting, housework, gardening, tennis, windsurfing and lifting children.

  • Page 31: Preparing Your Work Environment

    Preparing Your Work Environment When using HP computing equipment, it is important that your work environment contribute to your comfort and productivity. Your Chair It’s very important that your chair provides a comfortable sitting position and offers the following features: A stable base, such as five legs with casters.
  • Page 32 Operating the OmniBook Working in Comfort A curved seat edge. The front of the seat should be curved and finished in a “waterfall” edge. An adjustable back support in both height and forward and backward tilt. It is important that the backrest correctly supports the lower part, or lumbar curve, of the back.

  • Page 33: Setting Up Your Hp Computing Equipment

    Overall: Change your position frequently and take regular breaks to avoid fatigue. Setting Up Your HP Computing Equipment Make sure that all the elements of your HP computer system—monitor, document holder, keyboard, mice and other input devices, and headphones and speakers—are optimally arranged and adjusted to meet your personal requirements.
  • Page 34 Operating the OmniBook Working in Comfort The top of your monitor screen should be at or slightly below eye level. Most HP monitors come with a tilt-and-swivel feature that makes it easy to adjust the screen position. To avoid obscuring your view, the screen should be positioned perpendicular to your line of sight;...
  • Page 35 Your HP Keyboard The proper positioning and use of your HP keyboard is important when using HP computing equipment. Be sure to observe the following recommendations to optimize your comfort and safety:...
  • Page 36 We recommend you place your keyboard in front of the screen or document holder, whichever is viewed the most. Your HP keyboard has long cables so you can place it in the position that is most comfortable for you while you are using your system.
  • Page 37 Operating the OmniBook Working in Comfort As with the keyboard, try to keep your hand, wrist, and forearm in a neutral position while using your mouse or other input device. When using a stylus or light pen with a graphics tablet, don’t grip the stylus tightly. Keep your hand and fingers relaxed and try to maintain a neutral posture in your hand, wrist and forearm.

  • Page 38: Comfort And Safety Checklist

    Listening to loud sounds for prolonged periods may permanently damage your hearing. To avoid discomfort from unexpected noise, always turn down the volume before connecting headphones or speakers to your HP equipment. When you put on the headphones, slowly increase the volume until you find a comfortable listening level, then leave the volume control in that position.
  • Page 39 Working in Comfort, which is preloaded on the hard disk of your HP computing equipment.

  • Page 40: Your Hp Omnibook Computer

    HP port replicators offer quick, easy connections to these devices. More information on how to prepare your workspace environment and set up your HP equipment is available in other sections of Working in Comfort, which is preloaded on the hard disk of your HP computing equipment.
  • Page 41 Operating the OmniBook Working in Comfort Take frequent, short rest breaks. This is especially important in a mobile computing environment. Portable computers weigh between approximately 1.4 and 3.7 kilos (3 and 8 pounds). When traveling, be sure to carry your computer properly to minimize strain on your body.

  • Page 43: Managing Battery Power

    Managing Battery Power User’s Handbook...

  • Page 44: How Power Is Managed

    Managing Battery Power How Power is Managed How Power is Managed The OmniBook conserves power by using software that controls battery charging and power drain. If you’re using Windows 95 or Windows 98, Advanced Power Management (APM) is preinstalled on the OmniBook. If you’re using Windows NT 4.0, look for a Power icon in the taskbar.

  • Page 45: Monitoring Battery Power

    Monitoring Battery Power The primary source of power for the OmniBook is its rechargeable battery pack. You can use the ac adapter to recharge the battery—or to run on ac power to preserve the battery. Important Running external connections is a power-intensive operation that significantly shortens the length of a battery session.

  • Page 46: To Check The Battery Status

    Managing Battery Power Monitoring Battery Power To check the battery status From the Windows Taskbar Move the pointer onto the power icon at the right end of the taskbar. If you are using Windows NT 4.0, you’ll need to install Advanced Power Management to display the power icon (see “To install APM for Windows NT 4.0”...

  • Page 47: To Respond To A Low-Battery Warning

    To respond to a low-battery warning When battery power is critically low, you are alerted by one or more of the following: The computer emits a warning beep. This reminds you to save your work. If the OmniBook has been off, you will not be able to turn it on. As an emergency measure, the OmniBook automatically hibernates to preserve your current session.
  • Page 48 Managing Battery Power Monitoring Battery Power Charging time Charging the battery takes about 1.5-2 hours to fully charge. Battery life When the computer is in use, typical battery life can last up to 3-4 hours or more, depending on your level of use, your power management settings, and your computer model.

  • Page 49: To Replace The Battery

    To replace the battery CAUTION If you have any unsaved data, it (and your current work session) will be lost when you remove the battery unless the computer is connected to ac power. Also, you should wait at least 3 seconds after inserting the battery before you unplug the ac adapter.
  • Page 50 Managing Battery Power Monitoring Battery Power 6. Slide the battery’s front panel to the left. WARNING Do not mutilate, puncture, or dispose of batteries in fire. A battery can burst or explode, releasing hazardous chemicals. A rechargeable battery must be recycled or disposed of properly.

  • Page 51: Expanding The Omnibook

    Expanding the OmniBook User’s Handbook...

  • Page 52: Using The External Module Bay

    The Agaté Tioman hot-swap software lets you disconnect most modules in the plug-in bay without shutting down the computer and rebooting. (This software does not support Windows NT.) Click Start, Programs, Agaté Tioman for HP, Setup, then follow the onscreen instructions. User’s Handbook...

  • Page 53: To Remove Or Install The Bay Or Module

    To remove or install the bay or module For Windows 95 or Windows 98, if Agaté Tioman hot-swap software is installed, a plug- in module icon appears at the right end of the taskbar. This software lets you disconnect most plug-in modules without shutting down the computer. For a hard drive module, you must shut down the computer.
  • Page 54 Expanding the OmniBook Using the External Module Bay Windows 95 or 98 with “hot-swap” Removing Before you remove the 1. Close files on the cable or plug-in module. module drive. (The order doesn’t 2. Right-click the plug- matter.) in module icon in the taskbar, then click Remove Device.

  • Page 55: Connecting External Devices

    Connecting External Devices You can expand the OmniBook’s capabilities by connecting other devices. Note Before you connect any device, check the documentation that came with the equipment to see if you need to make any settings or adjustments to the equipment before using it. This might include setting switches to configure the equipment so that it will operate properly with the OmniBook and the software you plan to use.

  • Page 56: To Connect An External Monitor

    Expanding the OmniBook Connecting External Devices For information about connecting to serial devices, USB devices, audio devices, and infrared devices, see the section “Connecting External Devices” in the online Reference Guide. To connect an external monitor You can connect a VGA, SVGA, XGA, or SXGA monitor to your OmniBook—or UXGA for a computer with “900 B”...

  • Page 57: To Connect An External Keyboard Or Ps/2 Mouse

    2. Plug the mouse or keyboard PS/2 cable into the PS/2 port on the OmniBook. To connect both a mouse and keyboard, use the HP F1469A Y adapter. To connect a device that has a PC-type jack, first connect its cable to an adapter cable with a PS/2 jack.

  • Page 58: Using Pc Cards

    Expanding the OmniBook Using PC Cards Using PC Cards To insert and remove a PC Card Note If you are using Windows NT 4.0, make sure Card Executive is installed (see “To install Card Executive for Windows NT” on page 59). Windows NT 4.0 does not support zoomed video.

  • Page 59: To Find Tested Pc Cards

    To find tested PC Cards For the latest information about compatible cards, visit our website at http://www.hp.com/omnibook and check the Accessories section. Or contact Hewlett- Packard as described in “Support Assistance” on page 96. To install Card Executive for Windows NT 4.0 If a PC Card icon is present in the taskbar, Card Executive is installed.

  • Page 60: Installing A Hard Disk Drive

    Expanding the OmniBook Installing a Hard Disk Drive Installing a Hard Disk Drive To replace the hard disk drive You’ll need a small Phillips screwdriver for this procedure. 1. Unplug the ac adapter, if present, and remove the battery. 2. Turn the unit bottom side up and remove the hard drive screw. 3.
  • Page 61 Expanding the OmniBook Installing a Hard Disk Drive Important If you are installing a new hard disk drive, you should create a Hibernate partition on the drive before loading any software. The online Reference Guide shows how to install the holder on a new hard disk drive.

  • Page 62: Installing A Ram Expansion Module

    Expanding the OmniBook Installing a RAM Expansion Module Installing a RAM Expansion Module The OmniBook has 32 MB of memory (RAM) built in (64 MB for a model with “900 B” after the serial number), and it has one slot for installing additional RAM. You have to remove the computer keyboard to add or remove a RAM module.
  • Page 63 5. Lift up the keyboard tab above the F1 key about 10 mm (1/2 inch), then free the snap at the center of the back edge. 6. Slide the keyboard toward the display about 5 mm (1/4 inch), then fold the keyboard forward onto the front of the case.
  • Page 64 Expanding the OmniBook Installing a RAM Expansion Module 8. Fold the keyboard back into place. Slip the front tabs into the slots, then snap the back edge into place. 9. Insert the two screws at the top of the keyboard. 10.

  • Page 65: Configuring The Omnibook

    Configuring the OmniBook User’s Handbook...

  • Page 66: Using Bios Setup

    1. Close all applications, then shut down Windows and restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. The pointing devices are not active in the BIOS Setup utility. Press the RIGHT and LEFT arrow keys to move among menus.

  • Page 67: Configuring Security Options

    1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Select the Security menu. 4. Select Set Administrator Password, then press ENTER.

  • Page 68: To Delete An Omnibook Password

    1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Select the Security menu. 4. Select Set Administrator Password, then press ENTER.

  • Page 69: To Attach A Security Cable

    To attach a security cable Your OmniBook has two built-in connectors that allows you to secure the OmniBook with a cable. The Kensington MicroSaver lock system works with this connector and is available at many computer stores. 1. Wrap the cable around a stationary object, such as a table leg. 2.

  • Page 71: Troubleshooting

    Troubleshooting User’s Handbook...

  • Page 72: Solving Problems

    “Specifications and Regulatory Information” in the online Reference Guide. Find technical tips and software updates for the OmniBook at the HP Customer Care website (http://www.hp.com/cposupport/eschome.html). Test your OmniBook by running the DiagTools test program. See “To run the diagnostic test”...
  • Page 73 If you always want to boot from a CD, check the boot order in BIOS Setup. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Open the Boot menu. The default boot order is...

  • Page 74: Audio Problems

    For a model without “900” after the serial number, check settings in BIOS Setup. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the System Devices menu, check that Audio is enabled.

  • Page 75: Display Problems

    Display Problems If the OmniBook is on, but the screen is blank Press the space bar or move the pointer to see if the computer is in Standby mode. Press Fn+F1 or Fn+F2 to adjust the display brightness. If you are using an external keyboard, Fn=left CTRL + left ALT.
  • Page 76 Troubleshooting Solving Problems Use a monitor or projector that matches the resolution of the OmniBook display. If multiple display support doesn’t work in Windows 98 In Windows 98, the computer supports multiple independent displays using the built-in display and an external monitor connected to the monitor port. You can also add an independent display using a video adapter in a docking system.

  • Page 77: Hard Disk Drive Problems

    Hard Disk Drive Problems If the OmniBook’s hard drive doesn’t spin Check the power source. Remove and reinsert the hard drive. See “To replace the hard disk drive” on page 60. If the hard disk makes buzzing or whining noise Back up the drive immediately.

  • Page 78: Keyboard And Pointing Device Problems

    1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the System Devices menu, check that Infrared Port is enabled and the desired mode is selected.
  • Page 79 Make sure the touch pad or pointing stick is enabled in the BIOS Setup utility. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the System Devices menu, check Internal Pointing Devices.
  • Page 80 Troubleshooting Solving Problems If you can’t type the euro symbol Hold ALT GR when you press the marked key. The euro symbol is not on the U.S. English keyboard. Make sure the embedded keypad is active (Fn+F8) and Num Lock is on, then hold ALT while typing 0128 on the numeric keypad.

  • Page 81: Memory Problems

    Start, Help and use the MS-DOS Troubleshooter. Not all 3rd party memory cards have been tested with the OmniBook. Please check the OmniBook website (http://www.hp.com/omnibook) for a list of approved and tested memory cards. If memory doesn’t increase after adding RAM Use the correct type of memory (RAM) modules for your computer.

  • Page 82: Performance Problems

    Try the card in another computer. Not all 3rd party PC cards have been tested with the OmniBook. Please check the OmniBook website (http://www.hp.com/omnibook) for a list of approved and tested PC Cards. Certain Xircom CE2 (IIps) LAN cards conflict with the game port device in Windows 2000.

  • Page 83: Power And Battery Problems

    Check the BIOS Setup settings. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the Power menu, set the Power Management Mode to Max. Performance.
  • Page 84 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the Power menu, make sure the Power Management Mode is set to Maximum Power Savings.
  • Page 85 If nothing happens, insert a straightened paper clip into the system-off button on the left side of the OmniBook. Then press the blue power button to turn on the OmniBook. If the OmniBook doesn’t suspend as expected If you have a connection to another computer, the OmniBook doesn’t suspend if the connection is actively in use.

  • Page 86: Printing Problems

    If the printer you are using is a 600-dpi (dots per inch) printer, try selecting a compatible printer driver for a 300-dpi printer. For example, for a 600-dpi HP LaserJet printer, try using the HP LaserJet IIIsi driver (300-dpi). Certain applications may not work properly with 600-dpi printers.

  • Page 87: Serial, Parallel, And Usb Problems

    Check settings in BIOS Setup. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the System Devices menu, check that Parallel and Serial are enabled.

  • Page 88: Startup Problems

    Troubleshooting Solving Problems If the USB port is not working Windows NT 4.0 does not support USB devices. Check settings in Control Panel. Contact the vendor of the peripheral device, as well as the OmniBook website, for the latest versions of the USB drivers. Startup Problems If the OmniBook doesn’t respond at turn-on Connect the ac adapter.
  • Page 89 After checking all connections, check the boot order and setup in BIOS Setup utility. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Open the Boot menu. The default boot order is...

  • Page 90: Testing The Operation

    See “To create a diagnostic floppy disk” on page 91. 1. Reboot the OmniBook. When you see the HP logo and the F10 prompt, press F10 to start the diagnostic test. 2. Go through the first several screens.

  • Page 91: To Create A Diagnostic Floppy Disk

    Check the C:\Dmi\Hpdiags directory. If diaginst is in this directory, double-click it. –or– If HP TopTools is installed, check the DiagTools page to see if it can create the disk. On any computer with World Wide Web access, download the diagnostic software package from the HP Customer Care website (http://www.hp.com/cposupport/eschome.html), and follow the instructions.

  • Page 92: Recovering Software

    On the Recovery CD ROM, under \Omnibook\Drivers. On the OmniBook hard drive under C:\Omnibook\Drivers. On the HP Customer Care website at http://www.hp.com/cposupport/eschome.html. This website contains the latest updates of software drivers. Detailed instructions for installing the drivers are contained in the Drivers\Readme file.

  • Page 93: To Recover The Factory Installation Of Windows

    If you’re using a CD-ROM drive in the module bay, press ESC two times when you see the HP logo. Select the CD-ROM drive as the boot device. 5. When the Recovery CD dialog box appears, follow the displayed instructions. If prompted, accept the recommended partition size.

  • Page 94: To Create A Support Utility Disk

    Troubleshooting Recovering Software 6. When prompted to reboot the computer, press CTRL+ALT+DEL and follow any displayed instructions. To create a Support Utility Disk If you want to use the Recovery CD in a PC Card CD-ROM drive or parallel port CD- ROM drive, you’ll need a Support Utility disk for certain operations.

  • Page 95: Support And Service

    Support and Service User’s Handbook...

  • Page 96: Getting Hp Omnibook Assistance

    Support and Service Getting HP OmniBook Assistance Getting HP OmniBook Assistance Support Assistance If you need assistance with your HP OmniBook or accessory, use any of the following support services: Provider Type 1. Electronic Support Services (see below) 2. Customer Support Centers (see below) 3.

  • Page 97: Repair Assistance

    Customer Support Centers HP Customer Support Centers will assist you by email or telephone for free (you are responsible for the telephone charges) during the term of the warranty. During the free assistance period, HP will assist with questions about: Included applications and operating systems.
  • Page 98 Support and Service Getting HP OmniBook Assistance To contact the Customer Support Center by email, visit the HP Customer Care website at http://www.hp.com/cposupport/eschome.html. For the latest list of phone numbers, see the OmniBook website under Support, http://www.hp.com/omnibook. North America United States: (970) 635-1000...

  • Page 99: Hewlett-Packard Limited Warranty Statement

    3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If HP is unable, within a reasonable time, to repair or replace any product to a condition as warranted, you will be entitled to a refund of the purchase price upon prompt return of the product.
  • Page 100 Support and Service Hewlett-Packard Limited Warranty Statement EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

  • Page 101: Specifications And Regulatory Information

    Specifications and Regulatory Information User’s Handbook...

  • Page 102: Hardware Specifications

    Hardware Specifications In a continuing effort to improve our products, the specifications shown below are subject to change. For the latest specifications, see the OmniBook website, http://www.hp.com/omnibook. Physical Attributes Models with 12-inch display: Size: 11.8 × 8.8 × 1.26 in (30.0 × 22.5 × 3.2 cm).
  • Page 103 Windows 95/98/2000-compatible Plug-and-Play. Windows NT 4.0 and PC Card Plug-and-Play. Advanced Power Management (APM). DMI with HP TopTools. Adobe Acrobat Reader. Agaté Tioman for HP (Hot Swap). DiagTools. VirusScan. Online Reference Guide . OmniBook Recovery CD included. Centralized worldwide BIOS and driver update service...
  • Page 104 Specifications and Regulatory Information Hardware Specifications Security Features User and administrator passwords. System, hard drive, and docking passwords. PC identification displayed at boot. DMI-accessible electronic serial number. Kensington MicroSaver lock slot. Environmental Operating temperature: 5 to 35 C (41 to 95 F). Limits Operating humidity: 20 to 90 percent RH (5 to 35 C).

  • Page 105: Safety Information

    250 Vac (2.5 A) 250 Vac (2.5 A) 125 Vac (3 A) 250 Vac (2.5 A) 250 Vac (2.5 A) 250 Vac (2.5 A) 250 Vac (2.5 A) Safety Information HP Part Number 8120-6313 8120-6314 8120-8699 8120-6312 8120-6316 8120-6317 8120-8367...

  • Page 106: Ergonomics

    When discarding a battery pack, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. To obtain a replacement battery, contact your local dealer or HP sales office. Do not charge the battery pack if the ambient temperature exceeds 45 °C (113 °F).

  • Page 107: Led Safety

    (light-emitting diode) device according to International Standard IEC 825-1 (EN60825- 1). This device is not considered harmful, but the following precautions are recommended: If the unit requires service, contact an authorized HP service center—see “Support Assistance” on page 96. Do not attempt to make any adjustment of the unit.

  • Page 108: Regulatory Information

    Specifications and Regulatory Information Regulatory Information Regulatory Information This section presents information that shows how the OmniBook complies with regulations in certain regions. Any modifications to the OmniBook not expressly approved by Hewlett-Packard could void the authority to operate the OmniBook in these regions.

  • Page 109: Canada

    Trade name: Hewlett-Packard Company Product name: HP OmniBook 900 Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

  • Page 110: International

    Hewlett-Packard Company Mobile Computing Division 19310 Pruneridge Ave. Cupertino, CA 95014 declares that the following product Product name: HP OmniBook 900 Options: conforms to the following product specifications Safety: IEC 950:1991+A1,A2,A3,A4 / EN 60950 (1992)+A1,A2,A3,A4,A11 GB4943-1995 IEC 825-1:1993 / EN 60825-1:1994, Class 1...

  • Page 111: Index

    Index ac adapter charging battery, 47 connecting, 15, 47 jack, 12 part number, 15 accessories plug-in modules, 53 troubleshooting, 72 adding RAM, 62 adjusting brightness, 25 volume, 26 administrator password, 67 Advanced Power Management (APM) preinstalled for Windows 95/98, Windows NT 4, 45 Agaté...
  • Page 112 Guide hot computer, 82 hot keys, 27 hot swapping installing software, 52 swapping modules, 53 troubleshooting, 73 HP Customer Care website, 10 I/O addresses, 72 infrared port connecting, See Reference Guide location, 13, 55 User’s Handbook safety, 107 troubleshooting, 77...
  • Page 113 troubleshooting, 81 Windows NT support, 59 PC-100 RAM, 62, 81 PCMCIA cards, 58 plug requirements, 105 plug-in modules, 53 pointing stick configuring, See Reference Guide disabling, See Reference Guide location, 12 troubleshooting, 78 using, 24 port locations, 14, 55 port replicator, 72 power checking battery, 46 connecting ac, 15, 47...
  • Page 114 warning (low battery), 47 websites, 10 Windows documentation, 10 installing drivers, 92 reinstalling, 93 Y2K, 16 Windows 2000 User’s Handbook undock security, 68 Windows NT 4 adding APM, 45 adding Card Executive, 59 administrator password, 16 euro symbol, 80 keyboard language, 16 Service Pack, 72 zoomed video not supported, 58 working in comfort, 29...

This manual is also suitable for:

Omnibook 900b - notebook pc

Table of Contents