To drag an item, move the pointer over the item. Press and hold the left
button while you move the pointer to the new location. Release the button.
To activate full touch pad capabilities
The built-in pointing stick driver supports only basic touch pad features. To activate
full touch pad capabilities, you have to
Remove the pointing stick driver.
Disable the pointing stick.
Install touch pad support.
Remove the pointing stick driver
1. From Control Panel, open Mouse, General and change the mouse type to
Standard PS/2 Port Mouse.
2. From Control Panel, open Add/Remove Program and remove IBM TrackPoint
support.
Disable the pointing stick
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Select the System Devices menu.
4. Highlight Internal Pointing Devices and select Touch Pad.
5. Press F10 to save and exit.
Install touch pad support
For Windows 95
From the Start menu, run c:\omnibook\drivers\win95\touchpad\setup.exe.
For Windows NT 4.0
From the Start menu, run c:\omnibook\drivers\nt40\touchpad\install.exe.
To activate full pointing stick capabilities
To activate full pointing stick capabilities, you have to
Remove the touch pad driver.
Enable the pointing stick.
Install pointing stick support.
Remove the touch pad driver
From Control Panel, click Add/Remove Program and remove touch pad support.
Enable the pointing stick
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
14